Samsung ppm42p2 사용자 가이드
45
Viewing the Main Screen
ENG
The program starts operating when entering the following sequence: Start
➜
Program
➜
Multiple
Display Control.
➣
The remote control Enable/Disable function operates whether or not the power is On/Off. This applies
to all the displays connected to the MDC. However, regardless of the status in which the MDC was
shut down, the remote control signal receiving function of all the displays is initialized to Enable when
the MDC is closed.
to all the displays connected to the MDC. However, regardless of the status in which the MDC was
shut down, the remote control signal receiving function of all the displays is initialized to Enable when
the MDC is closed.
Descriptions
ΠMain icons : Click the main icons to switch into each screen.
´ Display selection : Select a display from Display Selection by marking ‘
✔’.
ˇ Select button : Click Select All, Clear All to select or clear all displays.
¨ Info grid : Use Info Grid to see the brief information of selected display.
ˆ Control tools : Use Control Tools to control displays.
Ø Title : The current title to be controlled is displayed.
∏ Remote control : It allows you to enable or disable the remote control signal receiving function of the
display unit.
+ This Program is for Samsung PDP (Scart) Model Only. Other Models are not appoved.