Samsung HT-Q70 지침 매뉴얼
ENG
17
18
CONNECTIONS
HDMI Function
Resolution Selection
•
This function allows the user to select screen resolution for HDMI output.
In Stop mode, press and hold the
SD/HD
(Standard
Definition/High Definition)button on the remote control.
•
Resolutions available for the HDMI output are 480P, 720P and 1080i.
•
SD(Standard Definition) resolution is 480p and HD(High Definition)
resolution is 720p/1080i.
resolution is 720p/1080i.
Example: If the TV supports resolution up to 480p:
Press the
SD/HD
button.
•
A 480p video signal is output through the HDMI output.
•
If the TV does not support the configured resolution, you will not be able
to see the picture properly.
to see the picture properly.
•
You do not have to make separate adjustments, since the Home
Theater and TV will be automatically adjust themselves to the
optimal resolution and aspect ratio if connected to HDMI. (If the TV
is an HDTV and has an HDMI Input jack, output is automatically
converted to 1080i resolution (if supported by the TV).)
Theater and TV will be automatically adjust themselves to the
optimal resolution and aspect ratio if connected to HDMI. (If the TV
is an HDTV and has an HDMI Input jack, output is automatically
converted to 1080i resolution (if supported by the TV).)
•
For component video output, only 480P is supported.
•
When both HDMI and COMPONENT jacks are connected,
COMPONENT video is not displayed.
COMPONENT video is not displayed.
•
See your TV owner's manual for more information on how to select
the TV's Video Input source.
the TV's Video Input source.
Note
Connecting External Components
Connect AUX (Audio) In on the Home Theater to Audio Out on the external analog compo-
nent.
nent.
•
Be sure to match connector colors.
2
Analog signal components such as a VCR.
Press
AUX
on the remote control to select ‘DIGITAL IN / AUX1/AUX2’ input.
•
Each time the button is pressed, the selection changes as follows:
AUX1 ➝ AUX2 ➝ DIGITAL IN
•
You can also use the
FUNCTION
button on the main unit.
The mode switches as follows:
DVD/CD ➝ DIGITAL IN ➝ AUX1➝ AUX2 ➝ USB ➝ FM ➝ XM
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
1
3
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Connecting an External Digital / Analog Component
Optical Cable
(not supplied)
Audio Cable
(not supplied)
If the external analog compo-
nent has only one Audio Out,
nent has only one Audio Out,
connect either left or right.
•
You can connect the Video Output jack on your VCR to the TV, and connect the Audio
Output jacks on the VCR to this product.
Output jacks on the VCR to this product.
Note
Q70/TQ72(1~42)_XAC_ENG 2003.4.1 9:43 AM Page 20