Rockford Fosgate 100z2 사용자 가이드

• High Level Inputs 

– Allows compatibility with a variety of source units

• Gold-Plated RCA Input Jacks 

– Maintains signal quality by resisting

corrosion

• Independent Sensitivity Controls 

– Level controls for left and

right channels can be adjusted to match output levels from a variety of
source units

• Gold-Plated Power/Speaker Barrier Strip 

– Screw terminals

accept #10 spade lugs or bare wire sized from 10 to 18 AWG

• 80Hz Low-Pass Crossover 

– Crossover can be set for low-pass

operation or full range

• LED Power Indicator 

– Visual indicator illuminates when amplifier is

turned on

• 3 Years

• Trans•ana 

– Sound quality topology that sends an extended bandwidth

accurately to the output stages of the amplifier

• MEHSA 

– Very efficient heat dissipation technology

• TOPAZ 

– Eliminates troublesome ground loop noise between the source

and amplifier

• NOMAD 

– Extremely fast protection system that always protects the

amplifier and never degrades the sound

• MOSFET Devices 

– Power supply and output devices that have high

thermal stability, fast switching speed, low output impedance, and wide
bandwidth linearity

• DSM (Discrete Surface Mount) Technology 

– Fewer

connections, improved reliability, shorter signal paths, superior signal-to-
noise ratio and awesome sonic performance

• Diecast Heatsink – 

Dissipates heat generated by the amplifier’s

circuitry

RMS Continuous Power @ 14.4V (Competition Standard)
Stereo into a 4

Ω

 load (20Hz-20kHz, <0.05% THD) ............ 25x2

Stereo into a 2

Ω

 load (20Hz-20kHz, <0.10% THD) ............ 50x2

Bridged into a 4

Ω

 load (20Hz-20kHz, <0.10% THD) ........ 100x1

Dynamic Power @ 14.4V (IHF Standard)
Stereo into a 4

Ω

 load (20Hz-20kHz, 1% THD) ................... 50x2

Stereo into a 2

Ω

 load (20Hz-20kHz, 1% THD) ................... 80x2

Bridged into a 4

Ω

 load (20Hz-20kHz, 1% THD) ............... 160x1

Signal-to-Noise Ratio ................................ >100dB (A-weighted)
Frequency Response .................................. 20Hz-20kHz 

±

0.5dB

Bandwidth .............................................. 10Hz-250kHz 

±

3.0dB

Damping Factor @ 4

Ω .........................

>200 (at output connector)

Slew Rate .................................................................... 30v/

µ

s

IM Distortion (IHF) ..................................................... <0.05%
Input Impedance ............................................................ 20k

Ω

Crossover Point ......................................... 80Hz low-pass fixed
Crossover Slope ................................... 12dB/octave Butterworth
Source Unit Compatibility (+15dB gain overlap) .......... 20V max.
Input Sensitivity (0dB gain overlap) .................... 118mV to 3.4V
Operating Voltage ........................................ +9V to +15.4V DC
External Battery Fuse ................................................ 15A (ATC)
Standby Current

700mA

Dimensions ................................... 2.62"H x 9.60"W x 10.27"L

(6.65cm x 24.38cm x 26.08cm)

Weight ........................................................ 5.7 lbs. (2.58kg)

®

®

Specifications subject to change without notice

(1) Punch Verification Certificate
(4) Amplifier Mounting Screws (#8 x 3/4” Phillips)
(1) 9/64” Allen Wrench

(4) 9/64” End Cap Mounting Screws
(1) ATC In-line Fuseholder
(1) ATC 20 Amp Fuse

– 2 –