Olympus 1050 sw 사용자 가이드

46 EN

x SETUP X ALARM CLOCK

 When [

X] has not been set, [ALARM CLOCK] is not available.

 When [

jSILENT MODE] (p. 49) is set to [ON], the alarm will not sound.

 When [DUALTIME] (p. 45) is set to [ON], the alarm is activated at the date and time set in 

[DUALTIME].

OFF

—

—

The alarm is canceled.

ONE TIME

TIME

(Proceeds to 
the time setting 
screen

*1

.)

The alarm is activated once according to the 
selected time, sound and volume settings.

SNOOZE

*2

OFF/ON

SOUND TYPE

1/2/3

VOLUME

LOW/HIGH

DAILY

(Submenus 3 and 4 can be set in the 
same way as [ONE TIME].)

The alarm is activated daily at the same settings.

*1

  The setting procedure is identical to that in “Setting the date and time” (p. 13).

*2

  In this setting, even if the alarm is stopped once, it will be activated every 5 minutes, up to 7 times.

  To check the alarm time, press the 

g button while the camera is turned off. The current and 

alarm set times are displayed for approx. 3 seconds.

After making the detailed settings of [ONE 
TIME] or [DAILY], press the o button to 
turn off the camera.

When the alarm is activated, press any button 
to stop the alarm and turn off the camera.

  When [SNOOZE] is set to [OFF], the alarm 

stops automatically and the camera turns off 
after 1 minute of no operation.

x SETUP X VIDEO OUT

  The TV video signal system varies depending on the countries and regions. Before viewing camera 

images on your TV, select the video output according to your TV’s video signal type.

NTSC

Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on

PAL

Connecting the camera to a TV in European countries, China, and so on

  The factory default settings differ according to the region where the camera is sold.

book_oima_myu1050SW_en.indb   46

book_oima_myu1050SW_en.indb   46

2008/07/10   11:49:45

2008/07/10   11:49:45