Epson PM 290 빠른 설정 가이드

다운로드
페이지 6
Select a Layout
1
Press the
Menu button.
2
Press
to select Print Settings, then press OK.
3
Press
OK to select Layout.
4
Press
or to select the
layout you want, then press
OK.
Crop Your Photos
You can press the
Zoom
button to enlarge your image
up to 5 times.
You can select the area you
want to print, and PictureMate
will crop out the rest. This
does not change your original
image.
More on PictureMate
Check your printed manual
See the Basics book for instructions on
printing from PictureMate, your computer,
and other devices. Also learn how to save
photos to or print photos from a CD,
replace your Print Pack (photo paper and
photo cartridge), take care of PictureMate,
and solve problems.
Check your on-screen manual
After you install your PictureMate software from
the CD, you’ll see an icon for your
PictureMate
User’s Guide on your computer screen. Double-click
that icon for comprehensive instructions on using
PictureMate and its software.
Note: For information on possible software updates for PictureMate,
go to
epson.com/support, select Printers, and select your product
under
Personal Photo Lab. Then check for updated software in the
Drivers & Downloads section.
Caution: To avoid damaging your PictureMate, keep
it out of the sun and don’t leave it in your car or other
location where it can get too hot or too cold.
4
 Load Paper
PictureMate comes with genuine Epson
®
glossy photo paper
made especially for printing lab quality photos.
Caution: Don’t load or print on plain paper; this may damage
PictureMate.
1
Move the handle to the back
and open the paper support,
if necessary.
2
Press the corner of
the output tray to
open it.
3
Slide the edge guides outward.
4
Load up to 20 sheets at a time. Fan the sheets to
slightly separate them.
5
Place your paper into the slot between the edge
guides with the glossy side up. Slide the edge guides
inward slightly.
6
Raise the photo viewer screen.
Note: Keep unused paper in the original package and store it flat to
prevent curling.
5
 Insert a Memory
Card
 1
Remove the memory card containing photos from
 
your digital camera.
2
Insert your memory card into the correct slot on
PictureMate.
3
Push the card in until it stops (it won’t go in all
 
the way). The memory card light flashes and
 
PictureMate tells you how many photos are
 
on the card.
 
Note: Insert just one card at a time. PictureMate will
not read multiple cards at once.
6
 Print Your Photos
PictureMate’s photo viewer screen makes it easy to select the
photos you want to print, choose a layout, and even crop.
Select Some Photos
1
Press
or
to view your photos.
2
Press
OK to select a photo for printing.
3
To print more than one
copy, press
to increase
the number. Press to
decrease it.
4
To select more photos,
press
or
to view
them and press
OK to
select one. Repeat
step 3 to select more copies, if necessary.
5
Press
Print and use
or
to review your selected
photos. Then press
Print again to print.
Epson and PictureMate are registered trademarks and Exceed Your Vision is a
trademark of Seiko Epson Corporation.
General Notice: Other product names used herein are for identification purposes
only and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
© 2007 Epson America, Inc. 5/07
CPD-23838
Printed in XXXXXX XX.XX-XX XXX
Microdrive™
CompactFlash
®
(Type I and II)
 * Adapter required
** Maximum capacity 128MB
Bottom
Load glossy side up
Memory card light
SD™ (Secure Digital)
SDHC™ (High Capacity)
mini SD™ *
mini SDHC *
micro SD *
micro SDHC *
MMC™ (MultiMediaCard™)
xD Picture Card™
xD Picture Card (Type M and Type H)
Sony Memory Stick
®
**
Memory Stick Duo™ *
Memory Stick Micro *
Memory Stick PRO™
Memory Stick PRO Duo™ *
MagicGate™ Memory Stick **
MagicGate Memory Stick Duo™ *
Top