Rocktron velocity 100 사용자 가이드
3
Rear Panel
1
IN jack (Ch.2):
This ¼" jack provides an input to Channel 2 from the output of a preamp or the device in an
effects chain.
effects chain.
2
OUTPUTS jacks (Ch. 2):
These ¼" mono jacks provide outputs for Channel 2 to speaker cabinets. These jacks are
configured in parallel.
configured in parallel.
Important!
Do not use these outputs with loads of 2
Do not use these outputs with loads of 2
Ω
or less. When using both
output jacks to provide multiple speakers for a given channel, it is
important to ensure that the combination of speaker impedances for the
given Velocity 100 output channel does not equate to a combined
impedance of 2
important to ensure that the combination of speaker impedances for the
given Velocity 100 output channel does not equate to a combined
impedance of 2
Ω
or less.
3
POWER module
This module provides a connection for the power cord and also houses the main fuse of the
unit. (For information about changing the fuse, please see page 5.)
unit. (For information about changing the fuse, please see page 5.)
4
OUTPUTS jacks (Ch. 1):
These ¼" mono jacks provide outputs for Channel 1 to speaker cabinets. These jacks are
configured in parallel.
configured in parallel.
Important!
Do not use these outputs with loads of 2
Do not use these outputs with loads of 2
Ω
or less. When using both
output jacks to provide multiple speakers for a given channel, it is
important to ensure that the combination of speaker impedances for the
given Velocity 100 output channel does not equate to a combined
impedance of 2
important to ensure that the combination of speaker impedances for the
given Velocity 100 output channel does not equate to a combined
impedance of 2
Ω
or less.
5
IN jack (Ch.1):
This ¼" jack provides an input to Channel 1 from the output of a preamp or the device in an
effects chain.
effects chain.