BG r-17i 사용자 가이드
© BG Corp 2005
4
Unpacking Your BG Loudspeakers
1. Open the top of the box, remove your loudspeaker and place it on an even
surface in the general area of where be it will be installed.
2. Remove the foam pads off each end of the loudspeaker and pull the
loudspeaker out of the protective plastic bag.
3. Remove the wall-mounting bracket and drywall screw kit that is located in
the bottom of the box. Place those accessories near the loudspeaker.
Proper Hookup:
Red terminal post to positive (+) amplifier post
Black terminal post to negative (-) amplifier post
Break-in Times:
Typically a BG loudspeaker requires not less than 48
hours of operation at moderate sound level before reaching its optimum
sound quality. This improvement may be rather subtle but noticeable for
a trained listener. NOTE: Do not play your loudspeakers excessively loud
to try to accelerate this process!
sound quality. This improvement may be rather subtle but noticeable for
a trained listener. NOTE: Do not play your loudspeakers excessively loud
to try to accelerate this process!
Amplifier:
BG loudspeakers are extremely accurate and deliver a
high degree of detail and resolution. A good 100-150 watt per channel
amplifier or receiver will deliver adequate power for a typical room size.
Your authorized BG dealer can recommend an amplifier best suited to
your needs.
amplifier or receiver will deliver adequate power for a typical room size.
Your authorized BG dealer can recommend an amplifier best suited to
your needs.
General Information