LG CM4341 사용자 가이드
Operating
20
Oper
ating
3
Radio Operations
Be sure that FM antenna is connected.
(Refer to page 15)
(Refer to page 15)
Listening to the radio
1. Press FUNCTION until FM appears in the display
window.
The last received station is tuned in.
The last received station is tuned in.
2. Auto tuning : Press TUNING -/+ on the remote
control or Y/U on the unit for about 2
seconds until the frequency indication starts
changing, then release. scanning stops when
the unit tunes in a station.
changing, then release. scanning stops when
the unit tunes in a station.
Manual tuning: Press TUNING -/+ on the
remote control or Y/U on the unit
remote control or Y/U on the unit
repeatedly.
3. Adjust the volume by pressing VOL +/- on the
remote control or by rotating volume knob on
the unit repeatedly.
the unit repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press FUNCTION until FM appears in the display
Before tuning, make sure to turn down the volume.
1. Press FUNCTION until FM appears in the display
window.
2. Select the desired frequency by pressing
TUNING-/+ on the remote control or
Y/U on the unit.
Y/U on the unit.
3. Press PROGRAM/MEMORY. A preset number
will blink in the display window.
4. Press PRESET·FOLDER W/S to select the
preset number you want.
5. Press PROGRAM/MEMORY on the remote
control . The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen to a preset station, press
7. To listen to a preset station, press
PRESET·FOLDER W/S or 0 to 9 numerical
buttons.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY for two
seconds. “ERASEALL” will blink in the unit display.
2. Press PROGRAM/MEMORY to erase all saved
radio stations.
Improving poor FM reception
Press d/M on the remote control or T on the
unit. This will change the tuner from stereo to
mono. Then the reception will be better than
before.
mono. Then the reception will be better than
before.
Seeing information about a
Radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about the
radio station being listened to. Press RDS/SET on
the remote control or DEMO/RDS on the unit
repeatedly to cycle through the various data types:
System) facility. This shows information about the
radio station being listened to. Press RDS/SET on
the remote control or DEMO/RDS on the unit
repeatedly to cycle through the various data types:
PS
(Programme Service Name)
The name of the channel will appear in
the display.
The name of the channel will appear in
the display.
PTY
(Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
The programme type (e.g. Jazz or News)
will appear in the display.
RT
(Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
A text message contains special
information from the broadcast station.
This text may scroll across the display.
CT
(Time controlled by the channel)
This shows the time as broadcast by the
station.
This shows the time as broadcast by the
station.
You can search the radio stations by programme
type by pressing RDS/SET on the remote control
or DEMO/RDS on the unit. The display will show
the last PTY in use. Press PTY one or more times
to select your preferred programme type. Press
and hold TUNING -/+. The tuner will search
automatically. When a station is found, the search
will stop.
type by pressing RDS/SET on the remote control
or DEMO/RDS on the unit. The display will show
the last PTY in use. Press PTY one or more times
to select your preferred programme type. Press
and hold TUNING -/+. The tuner will search
automatically. When a station is found, the search
will stop.