LG M3204CCBA 사용자 설명서

33

Chooses the language in which the control names are displayed.

Selects a label for each input source. For example, when connecting to PC in RGB mode,
* Select "PC" for the connecting device field. Otherwise, the screen may not display properly.

Use 

∧∨ to select On or Off. The set can be set up so that it can only be used with the remote control. 

This feature can prevent unauthorized viewing.
To lock OSD screen adjustment, set the 

Key Lock tab to the 'On' position.

To unlock it, do the following:
Push 

MENU on the remote control and set Key Lock to the 'Off' position.

You can assign a unique 

Set ID NO (name assignment) to each set when several set are connected 

for display. Specify the number (1 to 99) using 

<  > and exit. Use the assigned Set ID to individually 

control each set using the Set Control Program.

Leaving a fixed image on the screen for a long time may cause image burn-in. To use the set for a 
long period of time, use a screen saver on the PC or utilize the residual image prevention function on 
the set, and when the set is not used, turn the power off. Burn-in and related problems are not covered 
by the warranty on this set.

    Normal: Leave on normal if you don't foresee image burn in being a problem. 

    Orbiter:  May help prevent ghost images. However, it is best not to allow any fixed image to remain 

on the screen. To avoid a permanent image on the screen, the screen will move every 2 
minutes.

    Inversion:  This function inverts the panel color of the screen. The panel color is automatically 

inverted every 30 minutes.

    White wash:   White wash fills the screen with solid white. This helps removes permanent images burned 

into the screen. A permanent image may be impossible to clear entirely with white wash.

▼