Sony NW-E503 매뉴얼
38
Changing the USB
connection setting
(USB Bus
Powered)
connection setting
(USB Bus
Powered)
Depending on the computer you are using, if
the power supply is insufficient, incomplete
data transfer may occur from the computer to
your Network Walkman. In this case, setting
the USB connection (USB Bus Powered) to
“Low-power 100mA” may improve data
transfer.
the power supply is insufficient, incomplete
data transfer may occur from the computer to
your Network Walkman. In this case, setting
the USB connection (USB Bus Powered) to
“Low-power 100mA” may improve data
transfer.
1
Press and hold the SEARCH/
MENU button for half a second in
stop mode.
MENU button for half a second in
stop mode.
The menu screen is displayed.
Repeat Mode
Sound
Volume Mode
Sound
Volume Mode
2
Rotate the Shuttle switch to select
“Advanced Menu>”, and press the
Nx button to confirm.
“Advanced Menu>”, and press the
Nx button to confirm.
3
Rotate the Shuttle switch to select
“USB Bus Powered>”, and press
the Nx button to confirm.
“USB Bus Powered>”, and press
the Nx button to confirm.
4
Rotate the Shuttle switch to select
the setting you want and press the
Nx button to confirm.
the setting you want and press the
Nx button to confirm.
USB Bus Powered
High-power500mA
Low-power 100mA
Low-power 100mA
To cancel the Menu mode
Press the SEARCH/MENU button to return the
screen to the previous stage. Press repeatedly to exit
menu mode.
screen to the previous stage. Press repeatedly to exit
menu mode.
z
Tips
• When you connect the Network Walkman to a
notebook computer, connect the notebook
computer to a power supply.
computer to a power supply.
• The charging time will be longer if the “USB Bus
Powered” is set to “Low-power 100mA”.
Nx button
SEARCH/
MENU button
MENU button
Shuttle switch
to >
to .