Canon Wireless File Transmitter WFT-E4 II A 매뉴얼
13
Load a charged battery into the camera. Before attaching the transmitter to the camera, set the
camera’s power switch to <OFF>. The transmitter does not have a power switch. It is turned on
and off in conjunction with the camera’s power switch.
Before removing the transmitter, set the camera’s power switch to <OFF>.
camera’s power switch to <OFF>. The transmitter does not have a power switch. It is turned on
and off in conjunction with the camera’s power switch.
Before removing the transmitter, set the camera’s power switch to <OFF>.
1
Remove the terminal cap from the
camera.
camera.
Peel off the terminal cap on the camera bottom to
remove.
remove.
Attach the removed terminal cap to the
transmitter’s terminal cap holder.
transmitter’s terminal cap holder.
2
Attach the transmitter.
As shown in the figure, align the transmitter and
the camera, and turn the attachment knob to
attach to the camera.
the camera, and turn the attachment knob to
attach to the camera.
Attaching to the Camera
COP
Y