Olympus WS-802 매뉴얼 소개
67
5
EN
Menu setting method
Menu setting method
FM Menu
Rec Mode
You can change the recording mode when
recording from the FM radio. Select a
recording mode to suit your purpose.
[ PCM ]:
recording from the FM radio. Select a
recording mode to suit your purpose.
[ PCM ]:
The recording rate is automatically set to
[ 44.1kHz/16bit ].
[ 44.1kHz/16bit ].
[ MP3 ]:
The recording rate is automatically set to
[ 128kbps ].
[ 128kbps ].
[ WMA ]:
The recording rate is automatically set to
[ 128kbps ].
[ 128kbps ].
Auto-preset
Automatically adds receivable radio stations
to the presets.
See “ Presetting radio stations
automatically [ Auto-preset ] ” (
to the presets.
See “ Presetting radio stations
automatically [ Auto-preset ] ” (
☞ P.49).
For WS-803:
• The recorder uses some of its memory
capacity to maintain a management
file. For a microSD card, the indicated
remaining capacity is less than the total
capacity of the card due to characteristics
of the microSD card, but this is not a
malfunction.
file. For a microSD card, the indicated
remaining capacity is less than the total
capacity of the card due to characteristics
of the microSD card, but this is not a
malfunction.
System Info.
You can check information about the
recorder on the menu screen. [ Model ]
(Model Name), [ Version ] (System version)
and [ Serial No. ] (Serial Number) appear on
the display.
recorder on the menu screen. [ Model ]
(Model Name), [ Version ] (System version)
and [ Serial No. ] (Serial Number) appear on
the display.
Scan Level
You can change the scan sensitivity when
scanning for radio stations with auto preset.
Select the sensitivity to suit the reception
conditions.
[ High ]:
scanning for radio stations with auto preset.
Select the sensitivity to suit the reception
conditions.
[ High ]:
Receive radio station signals using high
sensitivity. You should normally select
this setting.
sensitivity. You should normally select
this setting.
[ Low ]:
Receive radio station signals using
reduced sensitivity. Try this setting when
signals from unwanted stations are
causing interference.
reduced sensitivity. Try this setting when
signals from unwanted stations are
causing interference.
Output
You can change the audio output of the FM
radio.
[ Earphone ]:
radio.
[ Earphone ]:
Output sound from the earphones. Sound
is not output from the built-in speaker
even if you unplug the earphones.
is not output from the built-in speaker
even if you unplug the earphones.
[ Speaker ]:
Always output sound from the built-in
speaker. Sound is not output from the
earphones even if you plug them in.
speaker. Sound is not output from the
earphones even if you plug them in.
• This is a different function from [ Speaker ]
in [ LCD/Sound Menu ]. Irrespective of
the [ Speaker ] setting, if you have set
[ Output ] to [ Speaker ] when listening to
the FM radio, sound from the radio is still
output from the speaker (
the [ Speaker ] setting, if you have set
[ Output ] to [ Speaker ] when listening to
the FM radio, sound from the radio is still
output from the speaker (
☞ P.65).
Can be operated only in [ FM Radio ]
mode.
mode.