Olympus μ TOUGH-3000 지침 매뉴얼

EN

  Do not insert SD/SDHC memory cards 

before the camera setup.

  Do not format the internal memory until the 

camera setup is complete. Doing so will 
erase the camera instruction manual and 
the PC software (ib) data that are stored on 
the internal memory.

  Check that your computer meets the 

following system requirements:
Windows XP (SP2 or later)/
Windows Vista/Windows 7

  Refer to the PC software (ib) help guide for 

details on how to use the PC software (ib).

  If nothing is displayed on the camera screen 

even after connecting the camera to the 
computer, the battery may be exhausted. 
Leave the camera connected to the 
computer until the battery has charged, then 
disconnect and reconnect the camera.

  Even if a computer has USB ports, proper 

operation is not guaranteed in the following 
cases:

Computers with USB ports installed using an 
expansion card, etc.

Computers without a factory-installed OS and 
home-built computers

  Double-click the icon for the camera drive 

(Removable Disk), and then execute 
Setup. exe to start the camera setup.

  When connecting the camera to the 

computer via USB cable, face the lens 
downward.

Multi-connector

USB cable 
(supplied)

Computer (on 
and running)

Indicator lamp

When the camera is connected to the 
computer, the battery in the camera will be 
charged.

When charging, the indicator lamp light. When 
charging is complete, the indicator lamp will turn 
off.

  If the indicator lamp does not light, the 

camera may be incorrectly connected, or 
the battery, camera, computer or USB cable 
may not be functioning correctly.

Set the camera date and time, time zone 
and display language automatically; install 
the camera instruction manual and PC 
software (ib).