Olympus μ TOUGH-3000 지침 매뉴얼

다운로드
페이지 83
63
EN
Appendix
Battery, USB-AC adapter 
(included), Charger (sold 
separately)
This camera uses one Olympus lithium ion 
battery
*
. No other type of batteries can be 
used.
* STYLUS TOUGH-8010/
μ TOUGH-8010, 
STYLUS TOUGH-6020/
μ TOUGH-6020: LI-50B
STYLUS TOUGH-3000/
μ TOUGH-3000: LI-42B
 Caution:
There is a risk of explosion if the battery is 
replaced with the incorrect battery type.
Dispose of the used battery following the 
instructions. (p. 73)
Power consumption by the camera varies 
depending on which functions are used.
During the conditions described below, power 
is consumed continuously and the battery 
becomes exhausted quickly.
The zoom is used repeatedly.
The shutter button is pressed halfway 
repeatedly in shooting mode, activating the 
auto focus.
A picture is displayed on the monitor for an 
extended period of time.
The camera is connected to a printer.
Using an exhausted battery may cause the 
camera to turn off without displaying the 
battery level warning.
The rechargeable battery is not fully charged 
at the time of purchase. Before using the 
camera, charge it by connecting it to a 
computer, or charge it using the included 
USB-AC adapter (F-2AC), a separately sold 
AC adapter (F-1AC/D-7AC) or charger
*
.
* STYLUS TOUGH-8010/
μ TOUGH-8010, 
STYLUS TOUGH-6020/
μ TOUGH-6020: LI-50C
STYLUS TOUGH-3000/
μ TOUGH-3000: 
LI-41C/LI-40C

Camera care
Exterior
Wipe gently with a soft cloth. If the camera is 
very dirty, soak the cloth in mild soapy water 
and wring well. Wipe the camera with the 
damp cloth and then dry it with a dry cloth. If 
you have used the camera at the beach, use a 
cloth soaked in clean water and wrung well.
If any dirt, dust, sand, or other foreign 
materials adhere to the camera after use, 
wash the camera using the method described 
on p. 70.
Monitor
Wipe gently with a soft cloth.
Lens
Blow dust off the lens with a commercial 
blower, then wipe gently with a lens cleaner.
Battery/USB-AC adapter
Wipe gently with a soft, dry cloth.
  Do not use strong solvents such as benzene 
or alcohol, or chemically treated cloth.
  Mold may form on the lens surface if the 
lens is left dirty.
Storage
When storing the camera for extended 
periods, remove the battery, AC adapter and 
card, and keep in a cool, dry place that is well 
ventilated.
Periodically insert the battery and test the 
camera functions.
  Avoid leaving the camera in places where 
chemical products are handled since this 
may result in corrosion.