Zanussi ZHC900X 사용자 설명서
EN
1
5
ELECTRICAL CONNECTION
Connect the hood to the mains through a two-pole switch hav-
ing a contact gap of at least 3 mm.
Remove the grease ¿OWHUs (see paragraph Maintenance) being
sure that the connector of the feeding cable is correctly inserted
in the socket placed on the side of the fan.
in the socket placed on the side of the fan.
Flue assembly
Upper exhaust Àue
Slightly widen the two sides of the upper Àue and hook them
Slightly widen the two sides of the upper Àue and hook them
behind the brackets 7.2.1, making sure that they are well
seated.
seated.
Secure the sides to the brackets using the 4 screws 12c (2.9 x
9.5) supplied.
Lower exhaust Àue
Slightly widen the two sides of the ÀXH and hook them be-
Slightly widen the two sides of the ÀXH and hook them be-
tween the upper Àue and the wall, making sure that they are
well seated.
well seated.
Fix the lower part laterally to the hood body using the 2 screws
12c (2.9 x 9.5) supplied.
Make sure that the air outlet connection is aligned with the
chimney outlets.