Zanussi ZFC14500WA 사용자 설명서

 

The lid is not closed properly.

Check if the lid closes well and

the gaskets are undamaged and

clean.

There is too much frost and ice.

The lid is not closed correctly or

the gasket is deformed/dirty.

Refer to "Opening and closing

the lid".

The water drainage plug is not

correctly positioned.

Position the water drainage plug

in the correct way.

Temperature is set incorrectly.

Refer to "Operation" chapter.

The temperature in the appliance

is too low/too high.

The temperature regulator is not

set correctly.

Set a higher/lower temperature.

 

The lid is not closed correctly.

Refer to "Opening and closing

the lid".

 

The products' temperature is too

high.

Let the product temperature de-

crease to room temperature be-

fore storage.

 

Many products are stored at the

same time.

Store less products at the same

time.

The thickness of the frost is

greater than 4-5 mm.

Defrost the appliance.

 

The lid has been opened often.

Open the lid only if necessary.

 

Products to be frozen are placed

too closely to each other.

Make sure that there is cold air

circulation in the appliance.

If your appliance is still not working properly

after making the above checks, contact the

nearest Authorised Service Centre.
To obtain fast service, it is essential that when

you apply for it you specify the model and serial

number of your appliance which can be found

either on the guarantee certificate or on the

rating plate located on the external right side of

the appliance.

Do not remove the lamp cover at the

time of replacement. Do not operate

the freezer if the lamp cover is

damaged or missing.

1. Disconnect the mains plug from the mains

socket.

2. Replace the used lamp with a new lamp of

the same power and specifically designed

for household appliances (the maximum

power is shown on the lamp cover).

3. Connect the mains plug to the mains

socket.

4. Open the lid. Make sure that the lamp

comes on.