Fujifilm FinePix S100FS 사용자 매뉴얼

162

Troubleshooting

Z Connecting

Z Others

Connecting to TV

There is no image 
or sound on the 
TV.

The camera is not connected to the TV 
correctly.

Connect the camera and TV correctly.

132

The included A/V cable was connected 
during movie playback.

After the movie playback mode is stopped, 
connect the camera and TV correctly.

119, 

132

“TV” is selected as the TV input.

Set the TV input to “VIDEO”.

–

The video output setting is incorrect.

Change the setting to [NTSC] or [PAL].

121, 

124

The TV volume is turned down.

Adjust the volume.

–

The TV image is 
black and white.

The video output setting is incorrect.

Change the setting to [NTSC] or [PAL].

121, 

124

Connecting to PC

PC does not 
recognize the 
camera.

The USB cable is not correctly connected 
to the PC or camera.

Set up the camera, and connect the USB 
cable correctly.

143

Connecting to 
printer

Cannot print with 
PictBridge.

• The USB cable is not correctly 

connected to the printer or camera.

• The printer is not turned on.

• Set up the camera, and connect the USB 

cable correctly.

• Turn the printer on.

134

Camera operation 
etc.

Nothing happens 
when pressing the 
buttons on the 
camera.

Camera malfunction may be caused 
temporarily.

Briefly remove the battery or disconnect 
the AC power adapter. Then reload the 
battery or reconnect the AC power adapter 
and try again.

19, 

133,

The battery has run out.

Load new or fully charged battery.

18, 19

The camera no 
longer works 
correctly.

Camera malfunction may be caused 
temporarily.

Briefly remove the battery or disconnect 
the AC power adapter. Then reload the 
battery or reconnect the AC power adapter 
and try again. If you think the camera is 
faulty, contact your FUJIFILM dealer.

19, 

133, 

172