Cisco Model 6109 6 MHz Off-Air Reference (NTSC) 설치 가이드
Chapter 3 USRM Web Interface
204
78-4021139-01 Rev D
ResourceManager - QAM - GQAM - SNMP Config Page
This page allows operators to configure SNMP parameters for the GQAM.
Parameters
The following table explains the ResourceManager - QAM - GQAM - SNMP Config
The following table explains the ResourceManager - QAM - GQAM - SNMP Config
page parameters.
Parameter
Description
SnmpBaseOld
SNMP base object identifier (OID) value.
SnmpConfig
Sets the management state for the device, as follows:
Managed - The device is configured via SNMP.
Unmanaged - The SNMP manager is inhibited, allowing
Managed - The device is configured via SNMP.
Unmanaged - The SNMP manager is inhibited, allowing
you to configure the settings directly on the USRM.
SnmpSetCommString
The SNMP SET community string.
Default: private
Default: private
SnmpGetCommString
The SNMP GET community string.
Default: public
Default: public
ManagementStatus
Indicates the status of the SNMP connection.