Datalogic 94A151132 전단
Elf™/Falcon™ X3 Four Slot Dock
NOTE
Read this manual carefully before performing any
type of connection from the terminal to a host PC
using the Four Slot Dock.
The user is responsible for any damages caused
by incorrect use of the equipment or by
inobservance of the indication supplied in this
manual.
type of connection from the terminal to a host PC
using the Four Slot Dock.
The user is responsible for any damages caused
by incorrect use of the equipment or by
inobservance of the indication supplied in this
manual.
The Four Slot Dock paired with an Elf PDA or a Falcon X3
mobile computer builds a reading system for the collection,
decoding and transmission of barcode data.
The Four Slot Dock can charge both the terminals and the spare
batteries at the same time. The spare batteries can be charged
by inserting them into the slots at the back of the cradle.
The Four Slot Dock comes in two different models, the Charger
and the Ethernet:
−
Elf Charger 94A151134; Elf Ethernet 94A151132
− Falcon X3 Charger 94A151135; Falcon X3 Ethernet
94A151133
The Ethernet model also provides Ethernet connection for data
transfer via local area networks.
transfer via local area networks.
Figure 1 –Four Slot Dock
Key:
A)
Link LED for Ethernet Port 1,2,3,4
∗
B)
Battery charger LED for Slot 1,2,3,4
C)
Power supply connector
D)
Ethernet Port 1 (with integrated Link and Speed LEDs)
∗∗
E)
Ethernet Port 2 (with integrated Link and Speed LEDs)**
F)
Power on LED
822000962 (Rev. B)
∗
Used in the Ethernet Four Slot Dock only
∗∗
Available in the Ethernet Four Slot Dock only
MOBILE COMPUTER INSERTION/ REMOVAL
For correct insertion into the cradle, insert the mobile computer
from the top of the cradle and push it down until the clip of the
cradle clicks
To remove the mobile computer from the cradle, simply pull it
upwards while holding the cradle firmly down.
.
Figure 2 - Mobile Computer Insertion
Power Supply
Each 4SD requires a power supply to be connected to mobile
computers. We recommend the power supply already included in
the box.
-
+
Figure 3 - Power Supply Polarity
LED INDICATORS
Power LED Status Indicator (F)
Color Status
Green Cradle
powered
Battery Charging LED Status Indicators (B)
Color Status
Off Battery
absent
Red
Battery charge in progress
Green Charge
completed
Red Blinking
Error
USING THE SPARE BATTERY CHARGER
Correctly insert the battery pack into the slot and simply press it
into the slot until the battery latch is automatically closed;
charging starts automatically.
into the slot until the battery latch is automatically closed;
charging starts automatically.
Figure 4 - Spare Battery Insertion
To remove the battery, release the latch on the battery pack.
Figure 5 - Spare Battery Removal
A
B
F
C
D
E