Cisco Cisco ASA 5520 Adaptive Security Appliance 기술 매뉴얼

This document contains information to help you secure Cisco ASA devices, which increases the
overall security of your network. This document is structured in 4 Sections

    Management Plane Hardening - This applies to all ASA related Management/To the box traffic
like SNMP,SSH etc.
   Securing config - Commands through which we can stop populating the passwords etc for the
running config etc
   Logging and Monitoring - This applies to any settings related to logging on ASA.
   Through Traffic - This applies to the traffic which goes through the ASA.

   
The coverage of security features in this document often provides enough detail for you to
configure the feature. However, in cases where it does not, the feature is explained in such a way
that you can evaluate whether additional attention to the feature is required. Where possible and
appropriate, this document contains recommendations that, if implemented, help secure a
network.

There are no specific requirements for this document.

The information in this document is based on these software and hardware versions:

Cisco ASA5500-X 9.4(1) and later.

●

The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.

This configuration can also be used with Cisco ASA 5500-X Series Security Appliance Software