Samsung UD55A 사용자 설명서
Wall Mount Kit Specifications (VESA)
Note
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building
materials, please contact your nearest dealer. If you install the product on a slanted wall, it may fall
and result in severe personal injury.
materials, please contact your nearest dealer. If you install the product on a slanted wall, it may fall
and result in severe personal injury.
Note
•
Standard dimensions for wall mount kits are shown
in the table below.
in the table below.
•
When purchasing our wall mount kit, a detailed in-
stallation manual and all parts necessary for assembly
are provided.
stallation manual and all parts necessary for assembly
are provided.
•
Do not use screws that do not comply with the VESA
standard screw specifications. Screws that are too
long may cause damage to the inside of the product
set.
standard screw specifications. Screws that are too
long may cause damage to the inside of the product
set.
•
For wall mounts that do not comply with the VESA
standard screw specifications, the length of the
screws may differ depending on the wall mount spec-
ifications.
standard screw specifications, the length of the
screws may differ depending on the wall mount spec-
ifications.
•
Do not fasten the screws too strongly this may dam-
age the product or cause the product to fall, leading
to personal injury. Samsung is not liable for these
kinds of accidents.
age the product or cause the product to fall, leading
to personal injury. Samsung is not liable for these
kinds of accidents.
•
Samsung is not liable for product damage or personal
injury when a non-VESA or non-specified wall
mount is used or the consumer fails to follow the
product installation instructions.
injury when a non-VESA or non-specified wall
mount is used or the consumer fails to follow the
product installation instructions.
•
Do not mount the product at more than a 15 degree
tilt.
tilt.
•
Always use two people to mount the product to a wall.
Model name
VESA Spec.(A * B)
Standard Screw
Quantity
UD46A
UD55A
600 x 400
M8
4EA
Caution
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury
due to electric shock.
due to electric shock.
Remote Control(RS232C)
Cable connections
interface
RS232C(9 pin)
Introduction