Samsung Electric Dryers 사용자 설명서

2

An occurrence of an Error will make a sound of error melody for 5sec and con  tinuously show one 
of the Error Displays from the following errors.

The Termistor resistance is very 
low or high.

Check for: 
- Clogged lint screen. 
- Restricted vent system. 
- Check Thermistor resistance.

Invalid heating Temp in running 
the dryer

Check for: 
- Restricted vent system. 
- Check Thermistor resistance.

Running the dryer with door
open

Check for: 
- Close the door, and run the dryer 
- Loose or open wire terminals in 
Door Sense circuit.

Invalid door state for more than 
256 milliseconds

Check for: 
- Loose or open wire terminals 
in Door Sense circuit.

Invalid state of key circuit short 
for 30 secs(all models)  
75 secs(DV339,DV338,DV448,D
V438,DV428)

Check for: 
- Display PCB key circuit short or not

Invalid power source Frequency

Check for: 
- Not using regular power source 
frequency 
- Invalid power frequency sense circuit

Electronic Control Problem 
(Communication Error)

Check for: 
- Check PCB and Wire harness.
- Replace PCB

Invalid Dry time in excess Dry 
time

Check for: 
- Sensor bar Open 
- using Adjust time Up excessively

Invalid state of Eeprom 
communication

Check for : 
- PCB with Eeprom circuit.

To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before 
servicing, unless testing requires power.

Technical_information-02365B-07_EN.indd   2

2011-09-21   �� 3:02:35