Samsung 2014 Blu-ray Disc Player 사용자 설명서

DLNA lets you play music, video, and 

photo files located in your PC on the 

player.
To use DLNA with your player, you 

must connect the player to your 

network. (See pages 14~18). 

To use DLNA with your PC, you must 

install DLNA software on your PC.
For instructions explaining how to 

play content located on your PC, see 

page 21-22.

By using the Initial Settings function, 

you can set the language, Network 

Settings, etc.  

For more information about the Initial 

Settings function, refer to the Initial 

Settings section of this user manual 

(See page 10-11).

When set to On, Quick Start lets 

the player start up more quickly be 

decreasing the boot time.

✎

If this function is set to On, Standby 

power consumption will be 
increased.

Anynet+ is a convenient function that 

offers linked operations with other 

Samsung products that have the 

Anynet+ feature. 

To operate this function, connect this 

player to an Anynet+ Samsung TV 

with an HDMI cable. 

With Anynet+ on, you can operate 

this player using a Samsung TV 

remote control and start disc playback 

simply by pressing the pLAy ( 

 ) 

button on the TV’s remote control. 

For more information, please see the 

TV user manual.

✎

This function is not available if the 

HDMI cable does not support CEC.

If your Samsung TV has an Anynet+ 

logo, then it supports the Anynet+ 

function.

Depending on your TV, certain HDMI 

output resolutions may not work. 

Please refer to the user manual of 

your TV.

If you have Anynet+ turned on, when 

you turn off the product, disconnect, 

and then reconnect the power cable, 

the product turns on automatically to 

re-establish the Anynet+ connection. 

After about 15 seconds, it turns off 

again automatically.

Some Samsung TVs, when 

connected to this product using the 

Anynet+ function will, when you turn 

them on, display a warning popup 

message saying no connection has 

been found. Never-the-less, the 

Anynet+ connection is properly 
established and available to use

.

Enables you to manage the 

downloaded contents you accessed 

through a Blu-ray disc that supports 

the BD-LIVE service and stored on a 

flash drive.
You can check the device’s information 

including the storage size, delete the 

BD data, or change the Flash memory 

device.

✎

In the external memory mode, disc 
playback may be stopped if you 
disconnect the USB device in the 
middle of playback.

Your player supports the FAT16, 
FAT32, and NTFS file systems. We 
recommend you use USB devices 
that support the USB 2.0 protocol 
with 4 MB/sec or faster read/write 
speed.

The Resume Play function may not 
work after you format the storage 
device.

The total memory available to BD 
Data Management may differ, 
depending on the conditions.

You can select the language you 
prefer for the On-Screen menu, disc 
menu, audio, and subtitles.

✎

The selected language will only 
appear if it is supported on the disc.

When you access this function for 

the first time, the PIN screen appears. 

Enter the default PIN - 0000 - using 

the number buttons. To change the 

PIN, use the Change PIN function. 

Each time you access the Security 

Settings hereafter, you must enter that 

four digit PIN. If you don’t change the 

PIN, continue using the default PIN.