Samsung 2014 Blu-ray Disc Player 사용자 설명서

Connecting to an Audio System

You can connect the Blu-ray player to an audio system using one of the

methods illustrated below.

- Do not connect the power cord to the wall outlet until you have made all

the other connections.

- When you change the connections, turn off all devices before you start.

method 1 Connecting to an HdmI supported AV receiver

●

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back

of the product to the HDMI IN jack on your receiver.

●

Best quality (Recommended)

method 2 Connecting to an AV receiver with dolby digital or a dTS
decoder

●

Using a digital Coaxial cable (not supplied), connect the Coaxial Digital

Audio Out jack on the product to the Digital Coaxial In jack of the receiver.

●

Good quality

●

You will hear sound only through the front two speakers with Digital Output

set to PCM.

Audio

method 2

method 1

Connecting to a Network Router

You can connect your player to your network router using one of the methods

illustrated below.
To use the DLNA network functionality, you must connect your PC to your

network as shown in the illustrations.
The connection can be wired or wireless.

Wired Network

Broadband
service

Broadband modem

(with integrated router)

Broadband

modem

Router

✎

NOTES

■

Internet access to Samsung's software update server may not be allowed,
depending on the router you use or your ISP's policy. For more information, contact
your ISP (Internet Service Provider).

■

DSL users, please use a router to make a network connection.