Samsung 2014 Blu-ray Disc Player 사용자 설명서
11
Go to Wired Network on the
right side of the page. If you
have not connected a LAN cable,
Initial Setup defaults to Wireless
Network. Go to Wireless Network
on the right side of the page.
✎
NOTES
■
If you have no network, select Skip
by pressing the BLUE (d) button,
and then go to Step 6.
by pressing the BLUE (d) button,
and then go to Step 6.
6. The Initial Settings Complete window
appears and remains on the screen
for a few moments. Then, the Home
screen appears.
Wired Network
1. The Blu-ray player automatically
verifies your wired network.
a previous d Skip m move " Select
Initial Settings I Network
Select your network type.
Network type Wired
Network cable connected.
Connect
2. After the player verifies the
network, press the v button.
3. Go to Step 6 on the left side of
the page.
Wireless Network
1. The Blu-ray player automatically
searches for and then lists all wireless
networks that are within range.
a previous d Skip m move " Select
Initial Settings I Network
Select your network type.
Network type Wireless
Wireless network
Add Network
you can connect your
Blu-ray player to the
internet. please select
which wireless network
to use.
WpS(pBC) Search
2. Select a network, and then press the
v button. The keyboard appears.
a previous d Skip m move " Select
Initial Settings I Network
linksys3
solugen_edu#2
iptime23
solugen_edu#1
solugen_edu#2
iptime23
solugen_edu#1
WpS(pBC)
Refresh
Enter security key.
0 / 64
Caps
1
2
3
4
5
6
7
8
9
0
Clear
q w e
r
t
y
u
i
o
p ^ *
123#& a
s d
f
g
h
j
k
l
~ @
!
done
z
x
c
v
b
n
m
,
.
?
-
▲
Cancel
ENG
.com
◀ ▶
▼
"
Select ' Return
Security Key
3. If your network has a password, use
the keyboard to enter it. Press the
number buttons on your remote to
enter numbers. Use the keyboard to
enter letters. If you want to display
the password as you enter it, select
Show Password on the right. When
finished, use the ▲▼◀▶ buttons to
select Done, and then press the v
button. If you have no password, go
to Step 4.
4. After the player verifies the
network, press the v button.
5. Go to Step 6 on the left side of
the page.
✎
NOTES
■
The Home screen will not appear
if you do not configure the initial
settings except as noted below.
if you do not configure the initial
settings except as noted below.
■
If you press the BLUE (d) button
during network setup, you can
access the Home screen even if the
network setup is not completed yet.
access the Home screen even if the
network setup is not completed yet.
■
When you return to the Home
screen, the full screen mode is
cancelled automatically.
screen, the full screen mode is
cancelled automatically.
■
If you want to display the Initial
Setting screen again to make
changes, press the ■ button on
Setting screen again to make
changes, press the ■ button on
the front panel of the player for
more than 5 seconds with no disc
inserted. This resets the player to its
default settings.
more than 5 seconds with no disc
inserted. This resets the player to its
default settings.
■
After the initial settings process
is complete. you can operate the
HDMI-CEC function.
is complete. you can operate the
HDMI-CEC function.
■
If you want to use the
Anynet+(HDMI-CEC) function to aid
in the initial set up process, please
follow the instructions below.
1) Connect the player to an
Anynet+(HDMI-CEC) compliant
Samsung TV using HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature
to On in both the TV and the player.
3) Set the TV to the Initial Settings
Procedure.
Anynet+(HDMI-CEC) function to aid
in the initial set up process, please
follow the instructions below.
1) Connect the player to an
Anynet+(HDMI-CEC) compliant
Samsung TV using HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature
to On in both the TV and the player.
3) Set the TV to the Initial Settings
Procedure.
■
If you leave the player in the stop
mode for more than 5 minutes
without using it, a screen saver will
appear on your TV. If the player is
left in the screen saver mode for
more than 25 minutes, the power
will automatically turn off
mode for more than 5 minutes
without using it, a screen saver will
appear on your TV. If the player is
left in the screen saver mode for
more than 25 minutes, the power
will automatically turn off
.
Menu Navigation
BONUS
REPEAT
A-B
VIEW
REPEAT
LIGHT
1
2
4
3
1
HOmE Button : Press to move to the
Home menu.
2
RETURN Button : Return to the
previous menu.
3
v (Enter) / dIRECTION Button :
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
Activate the currently selected item.
Confirm a setting.
4
ExIT Button : Press to exit the
current menu.