Samsung HT-XA100 사용자 설명서

다운로드
페이지 32
42
playback
43
GB
  SYSTEM SETUP
Fast playback 
During playback, press the ,  button.
Each time you press either button, the playback speed will 
change as follows: 
 2x 
€ 4x € 8x € 32x € Normal. 
Compatible Devices 
USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc 
in Windows (2000 or later) without additional driver installation.)
MP3 Player: HDD and fl ash type MP3 players.
Digital camera: Cameras that support USB Mass Storage v1.0.
Cameras that operate as a removable disc in Windows (2000 or later) without additional driver 
installation.
USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
You may experience a difference in playback quality when you connect a USB1.1 device.
For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper 
operation.
USB card Reader: One slot USB card reader and Multi slot USB card reader.
Depending on the manufacturer. the USB card reader may not be supported.
If you install multiple memory devices into a multi card reader, you may experience problems.
If you use a USB extension cable, the USB device might not be recognized.
Supported Formats
Format
File name
File 
extension
Bit rate
Version
Pixel
Sampling 
Frequency
Still Picture
JPG
JPG  .JPEG
640x480
Music
MP3
.MP3
80~384kbps
44.1kHz
WMA
.WMA
56~128kbps
V8
44.1kHz
Movie
WMV
.WMV
4Mbps
V1,V2,V3,V7
720x480
44.1KHz~48KHz
DivX
.AVI,.ASF
4Mbps
DivX3.11~
DivX5.1, XviD
720x480
44.1KHz~48KHz
CBI (Control/Bulk/Interrupt) is not supported.
Digital Cameras that use PTP protocol or require additional program installation when connected to a 
PC are not supported.
  A device using NTFS fi le system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) fi le 
system is supported.)
Some MP3 players, when connected to this product, may not operate depending on the sector size 
of their fi le system.
The USB host function is not supported if a product that transfers media fi les by its manufacturer-
specifi c program is connected.
  Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
The USB host function of this product does not support all USB devices. For information on the 
supported devices, see page 58.
1.
2.
3.
4.

5.

6.


system setup
For your convenience, you can set this Home Theater's features for the best use in 
your home environment.
SETTING THE LANGUAGE
OSD(On-Screen Display) language is set to English by default.
In Stop mode, press the MENU button.
Press the Cursor ▼ button to move to Setup and then press the 
ENTER or ► button.
Select Language and then press the ENTER or ► button.
Press the Cursor ▲,▼ button to select OSD Language and then 
press the ENTER or ► button.
Press the Cursor ▲,▼ button to select the desired language 
and then press the ENTER button.
Once the setup is complete, the OSD will be English if 
English has been selected as language.
d Press the RETURN button to return to the previous level. 
d Press the EXIT button to exit the setup screen.
OSD LANGUAGE : Selecting the OSD Language
AUDIO : Selecting the Audio Language (recorded on the disc)
SUBTITLE : Selecting the Subtitle Language (recorded on the disc)
DISC MENU : Selecting the Disc Menu Language (recorded on the disc)
Ú  If the language you selected is not recorded on the disc, menu 
language will not change even if you set it to your desired language.
OTHERS : To select another language, select OTHERS and enter the  
 
language code of your country. AUDIO, SUBTITLE and  
 
DISC MENU language can be selected. 
1.
2.
3.
4.
5.



MOVE
ENTER
EXIT
RETURN
MOVE
ENTER
EXIT
RETURN
MOVE
ENTER
EXIT
RETURN
MOVE
SELECT
EXIT
RETURN
02068B-HT-XA100,XA100C.indd   42-43
02068B-HT-XA100,XA100C.indd   42-43
2008-01-31   오후 4:15:52
2008-01-31   오후 4:15:52