Samsung NV75J5170BS/EE 사용자 설명서

다운로드
페이지 340
English  63
Tr
ouble
shoo
ting
Information codes
If the oven fails to operate, you may see an information code on the display. Check the table 
below and try the suggestions.
Code
Meaning
Action
C-d1
Door lock malfunctions
Turn off the oven and then restart. 
If the problem continues, turn off 
all power for 30 seconds or more 
and then reconnect. If the problem 
is not fixed, please contact a service 
centre.
C-20
Sensor malfunctions
C-21
C-22
C-F1
Only occurs during EEPROM Read/
Write
C-F0
If there is no communication 
between the main PCB and sub PCB
C-F2
Occurs when a communication 
problem is maintained between the 
Touch IC <-> Main or Sub micom
Turn off the oven and then restart. 
If the problem continues, turn off 
all power for 30 seconds or more 
and then reconnect. If the problem 
is not fixed, please contact a service 
centre.
C-d0
Button problem
Occurs when a button is pressed and 
held for a period of time.
Clean the buttons and make sure 
there is no water on/around them. 
Turn off the oven and try again. If 
the problem continues, contact a 
local Samsung service centre.
S-01
Safety shutoff
Oven has continued operating at 
a set temperature for an extended 
time.
•  Under 105 °C - 16 hours
•  From 105 °C to 240 °C - 8 hours
•  From 245 °C to Max - 4 hours
This is not system failure. Turn off 
the oven and remove food. Thenm 
try again normally.
NV75J5170BS_EE_DG68-00617C-01_EN.indd   63
2015-06-04   �� 10:41:52