Canon ir2016, ir2020 매뉴얼
Addition to the Installation Procedure
1. How to Attach the IP-Modem Cable Using Tape
Attach the IP-modem cable [1] to the LAN cover [3] using the included sheet tape [2]. For the exact location of
where to attach it, see below:
- [4] See that the cable will be 45 to 50 mm long.
- [5] See that the cable is within 10 mm in the middle of the sheet tape.
- See that the sheet tape is attached butted against the IP cover [6].
where to attach it, see below:
- [4] See that the cable will be 45 to 50 mm long.
- [5] See that the cable is within 10 mm in the middle of the sheet tape.
- See that the sheet tape is attached butted against the IP cover [6].
2. Points to Note When Attaching the LAN Cover
A grounding wire is attached to the iR machine's IP PCB and IP cover.
When attaching the LAN cover, remove the screw [1] used to hold the grounding wire in place; then, tighten it to
keep both the grounding wire and the LAN cover [2] together in place.
When attaching the LAN cover, remove the screw [1] used to hold the grounding wire in place; then, tighten it to
keep both the grounding wire and the LAN cover [2] together in place.
[1]
[6]
[4]
[5]
[3]
[2]
[1]
[2]
PUB No.F-IM-6541-000 PRINTED IN JAPAN or CHINA