Apple twentieth anniversary mac 서비스 매뉴얼
Plugging in the power cord
Follow these steps to plug your equipment into a wall outlet:
1
Make sure the voltage switch inside the well on the bottom of the bass unit is set for the voltage you
connect to.
connect to.
The voltage switch is preset at the factory to the correct voltage for the area where you bought the
computer.
computer.
If there is any chance that the setting has been changed, or if you take the computer to a country with
a different voltage system, it’s important to check the voltage and change the setting if necessary. The
voltage switch must be set correctly to avoid damaging your computer.
a different voltage system, it’s important to check the voltage and change the setting if necessary. The
voltage switch must be set correctly to avoid damaging your computer.
Country
Voltage switch setting
France, Germany, and United Kingdom
230
Japan and United States
115
Set the switch to show “115” for
voltages in the 100–130 V range.
Set the switch to show “230” for
voltages in the 200–270 V range.
Before you plug your computer in,
check to see that the voltage
switch in the bass unit is
properly set. If you need
to change the setting,
insert a small screwdriver
in the slot and slide the switch.
Setting Up
13