3M firedam spray 200 sell sheet 사용자 설명서

다운로드
페이지 2
Warranty and Limited Remedy. This product will be free from defects in material and manufacture for a period of ninety (90) days from date of purchase. 3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is responsible for
determining whether the 3M product is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the warranty period stated above, your exclusive
remedy and 3M’s  sole obligation shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Limitation of Liability. Except where prohibited by law, 3M will not be liable for any loss or damage arising from a 3M product, whether direct, indirect, special, incidental or consequential,
regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Building Safety Solutions Department
3M Center, Building 223-2S-24
St. Paul, MN 55144-1000
1-800-328-1687
www.3m.com/firestop
Printed in the U.S.A. © 3M 2006
98-0
213-4341-7
40% Pre-consumer waste paper
10% Post-consumer waste paper
For more than 25 years, 3M has consistently delivered innovative firestop systems to building professionals.
Effective and easy to install, 3M
FireDam
Spray 200 is part of a family of 3M fire protection products that
offer affordable, long-lasting solutions in a variety of commercial, industrial and residential applications. 
A P P L I C AT I O N S
3M FireDam Spray 200 is ideal for
sealing head of wall, floor to wall
and perimeter joints between fire-
rated floors (concrete, fireproofed
fluted steel decks) and fire-rated
walls (gypsum, concrete). It helps
control the transmission of fire, 
heat, smoke, noxious gas and 
water before and during 
exposure to fire, while 
maintaining the integrity 
of the fire-rated construction. 
3M – The Leader in Fire Protection
800-328-1687
www.3m.com/firestop
S P E C I F I C A T I O N S
3M FireDam Spray is a sprayable, water-based coating that dries in ambient conditions to form a
flexible seal. The coating is listed by independent test agencies such as Intertek and UL. It’s been
cycled to meet the wind sway and thermal category of ASTM E 1399 (500 cycles at a minimum 10
cycles/minute). The coating was fire tested and evaluated under the pass/fail criteria conditions of
ASTM E 1966 and UL2079 at the maximum extended joint width. The coating has also been tested and
evaluated under the pass/fail criteria conditions of ASTM E 814 and UL 1479 for through penetrations.
It complies with IBC, ICC, BOCA, ICBO, SBCCI and NFPA Code #101.
3M
FireDam
Spray 200
shown with airless sprayer 
3M and FireDam are trademarks of 3M.