Samsung bn68-02957a-01 사용자 설명서

Step 5

: Remote Control

Remote Control Buttons and Functions

 

✎

This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume buttons.

Selecting a Source

To watch a movie on your Blu-ray player or watch 
your favorite TV show, you must select the correct 
source. A source is a device, such as a Blu-ray/DVD 
player, a cable/satellite box, antenna or a cable TV 
input. Sources can be connected to your TV through 
the HDMI, DVI, Component, Composite, or D-sub 
connections, or through the Antenna or Cable In connections.
To view the signal from a source connected to the HDMI, DVI, Component, 
Composite, or D-sub jack, press the 

SOURCE

 button on your remote. Each time 

you press the 

SOURCE

 button, you change to a different source.

Viewing the On Screen Menus

To view the On Screen Menus, follow these steps:
1.  With the power on, press the 

MENU

 button on 

your remote. The main menu appears.  
The menu’s left side has the following menu 
options: Picture, Sound, Channel, Setup, 
Input, Application and Support.

2.  Press the 

▲ or ▼ button on your remote to select a menu option, and then 

press the 

ENTER

E button.

3.  When done using the menu, press the 

EXIT

 button on your remote to exit.

Step 6

: The Media Play Features

The Media Play feature lets you connect to your PC through your home network and 
stream PC audio and video files to your HDTV using your remote. To use IPTV or 
Samsung PC Share Manager, you must connect your TV to your network. You can 
attach the TV to your network in two ways, by cable, using CAT 5 cable, or wirelessly, 
using a Samsung Wireless LAN Adapter. Instructions for both connection methods are 
below.

Network Connection - Wired

There are two main ways to connect your TV to your network using cable, 
depending on your network setup. They are illustrated below:

Configuring the Network Connection - Wired

Most home networks use the Dynamic Host Configuration Protocol (DHCP) to 
configure network connections. Home networks that support DHCP automatically 
provide the IP address, subnet mask, gateway, and DNS values your TV needs to 
access the Internet so you don’t have to enter them manually.
To configure your network connection for a network that uses DHCP, follow these 
steps:
1.  Connect your TV to your network as shown in one of the illustrations above.
2.  Turn on your TV, press the 

MENU

 button on your remote, and then select 

Setup 

→ Network.

3.  Set the Network Type to Wired if it is not already set to Wired.
4.  Select Network Setup. The 

Network Setup screen appears.

5.  On the Network Setup menu, 

set Internet Protocol Setup and 
DNS to Auto. Auto acquires and 
enters the necessary internet values 
automatically.

6.  Select Network Test to check 

Internet connectivity.

 

✎

Some networks are Static 
IP networks. If your network 
is a Static IP network, you can not use DHCP to configure the network 
connection. Instead, you must enter the IP Address, Subnet Mask, 
Gateway, and DNS Server manually. For instructions explaining how to 
configure a Static IP network, see your user’s manual.

Changing Channels and Adjusting the Volume

Adjust the volume by pressing the Volume button 

on the remote.

Change the channels by pressing the Channel button on the remote.

 

✎

If your TV is attached to a cable or satellite box, change the channel using 
the box’s remote.

 

✎

You can also change the channels by pressing the z button on the front panel of your TV and adjust the volume by pressing the y button.

Network Connection - Wireless

You can connect your TV to your LAN through a standard wireless router or 
modem. To connect wirelessly, you must first attach a “Samsung Wireless LAN 
Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the 

USB 1 (HDD)

 or 

USB 2 

port on the back of your TV. See the illustration below.

Samsung’s Wireless LAN adapter is sold separately and is offered by select 
retailers, Ecommerce sites and Samsungparts.com. Samsung’s Wireless LAN 
adapter supports the IEEE 802.11A/B/G and N communication protocols. 
Samsung recommends using IEEE 802.11N. When you play the video over a IEEE 
802.11B/G connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices 
that access the network through an access point or AP (typically a wireless IP 
Sharer) to transmit an encrypted security code called an access key.
If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption 
type is set to WEP, TKIP or TKIPAES (WPS2Mixed) for your AP, Samsung TVs will 
not support a connection in compliance with new Wi-Fi certification specifications.

Configuring the Network Connection - Wireless

The instructions below are for networks that use the Dynamic Host Configuration 
Protocol (DHCP) to configure network connections automatically. If your have a 
Static IP network, see your user’s manual for configuration instructions.
To configure your network connection for a network that uses DHCP, follow these 
steps:
1.  Connect your TV to your network as shown in the illustrations above.
2.  Turn on your TV, press the 

MENU

 button on your remote, and the select Setup 

→ Network.

3.  Set the Network Type to Wireless if it is not already set to Wireless.
4.  Select Network Setup. The 

Network Setup screen appears.

5.  On the Network Setup menu, 

select an AP(Access Point) and ad 
hoc network. if you have selected 
network with a security key, the 
Security Key screen appears.

6.  Enter the security key using the 

numbers on the remote, and then 
press the Blue button on your 
remote.

 

✎

If your network uses WEP security encryption, 0~9 and A~F will be 
available on the Security Key screen. Use the Direction button on your 
remote to move to the characters and the enter key to select them.

7.  On the Network Setup menu, set Internet Protocol Setup and DNS to Auto. 

The Auto acquires and enters the necessary internet values automatically.

8.  Select Network Test to check internet connectivity.

 

✎

For more information, see your user’s manual.

Connecting a USB Device for Media Play

You can enjoy photo, music, 
and movie files stored on a 
USB device by connecting 
it to the TV and using 
the Media Play feature. 
For Media Play operating 
instructions, please see your 
Owner’s Manual.

The LAN Port on the Wall

LAN Cable (Not Supplied)

TV Rear Panel

Modem Cable (Not Supplied)

LAN Cable (Not Supplied)

The Modem Port on the Wall

TV Rear Panel

External Modem 

(ADSL / VDSL / Cable TV)

The LAN Port on the Wall

LAN Cable (Not Supplied)

Wireless IP sharer

Samsung Wireless LAN 

Adapter

or

TV Rear Panel

SUM

 Change Device

 View Devices    E Enter    R Return

MediaPlay

Videos

  

: 
: 
: 

: 

: 

: 

U Move   E Enter  R Return 

Internet Protocol Setup 

Auto 

r

IP Address
Subnet Mask
Gateway

DNS 

Auto

DNS Server

Network Setup

  

: 
: 
: 

: 

: 

: 

: 

 PBC(WPS)   U Move   E Enter   R Return 

Select a network 

Not Selected  r

Internet Protocol Setup 

Auto

IP Address
Subnet Mask
Gateway

DNS 

Auto

DNS Server

Network Setup

BN68-02957A-01

Turns the TV on and off.

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Turns the remote control light on or off. When on, the 
buttons become illuminated for a moment when pressed. 
(Using the remote control with this button set to ON will 
reduce the battery usage time.)

Displays Favorite Channel Lists on the screen.

Displays the channel list on the screen.

Displays information on the TV screen.

Selects the on-screen menu items and changes the values 
seen on the menu.
Exits the menu.

S.MODE

: Press to select the sound mode.

SLEEP

: Use to set the sleep timer function.

MTS

: Press to choose stereo, mono or Separate Audio 

Program (SAP broadcast).

P.MODE

: Press to select the picture mode.

P.SIZE

: Selects the picture size.

CC

: Controls the caption decoder.

Displays and selects the available video sources.

Press to directly access channels.

Press to select additional channels (digital) being 

broadcasted by the same station. For example, to select 

channel “54-3”, press “54”, then press “–” and “3”.

Adjusts the volume.

Brings up the OSD.

Displays Media Play.

Quickly select frequently used functions.

Returns to the previous menu.

These buttons are for the Channel list, Media Play 

menu, etc.

Use these buttons in Media Play and 

Anynet+ (HDMI-CEC) modes. 

(�: Controls recording for Samsung recorders that 

have the Anynet+ feature)

[QSG-6300]BN68-02957A-01Eng.indd   2

2010-09-03   오후 6:16:43