Sony HT-SF470 사용자 설명서

a)

For details, see “Enjoying the sound at low volume 
(NIGHT MODE)” (page 34).

b)

This parameter is only available when SAT/CATV 
input is selected.

c)

For details, see “Preparing for the “BRAVIA” 
Sync” (page 39).

d)

This parameter is only available when “CTRL 
HDMI” is set to “CTRL ON”.

e)

When the Auto Calibration result is saved, you can 
adjust the setting in 1 inch (1 cm) increment. 

f)

This parameter is only available when “CENTER 
SP” is set to “CENTER YES”.

g)

This parameter is only available when “SUR SP” 
is set to “SUR YES”.

h)

For details, see “Performing Auto Calibration” 
(page 26).

i)

This parameter is only available when the result of 
the Auto Calibration is saved.

j)

This menu is only available when you insert the 

 

S-AIR transmitter (not supplied). For details, see 
“Setting up an S-AIR product” (page 48).

k)

“FEET” for models of area code U2, CA2 only.

 

“M CM” for models of area code AR2 only.

You can adjust the level of each speaker to suit 
your preference.

x TEST TONE

You can adjust the speaker levels while 
listening to the test tone from your listening 
position.

x FL LEVEL (Front left speaker 

x CNT LEVEL (Center speaker 

x FR LEVEL (Front right speaker 

x SR LEVEL (Surround right 

x SL LEVEL (Surround left speaker 

x SW LEVEL (Subwoofer level)

V/v repeatedly until  

b.

V/v repeatedly until  

The test tone is emitted from each speaker 
in sequence as follows:
Front left 

t Center t Front right t 

Surround right 

t Surround left t  

Subwoofer

B until “TEST TONE” 

V/v repeatedly to select 

b.

The test tone is emitted from the speaker 
that is being adjusted only.
• FL LEVEL, CNT LEVEL, FR LEVEL, 

SR LEVEL, SL LEVEL, SW LEVEL

• “CNT LEVEL” does not appear when you set

 

“CENTER NO” in the “SP SETUP” setting.

• “SR LEVEL” and “SL LEVEL” do not 

appear when you set “SUR NO” in the 

 

“SP SETUP” setting.

V/v repeatedly to adjust 

You can adjust from –6.0 dB to +6.0 dB 
in 0.5 dB steps.

If you do not adjust for a certain period, the test 
tone is emitted from the next speaker in 
sequence.