Denon CHR-F103 사용자 설명서

10

Connect using the connection cables shown below.

Analog connections (Stereo)

Pin-plug cable

System connections

System cable

(White)

(Red)

NOTE:
• Do not plug in the power supply cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power supply cords together with speaker cables. Doing so could result in humming

or noise.

• Making connections with the power turned on could result in noise or damage the speakers.
• Bunching the power supply cords and connection cables together could result in humming or noise.
• Connect all the connection cables between the different components firmly. The system may not

operate properly if the connections are incomplete.

• Be sure to disconnect the power supply cords when changing the connections. Changing the

connections while the system is operating could result in malfunction.

Audio signal

IN

OUT

OUT

IN

CHR-F103

DRA-F102/
F102DAB

DRR-F102

To ensure performance and safety, it is recommended to arrange the components as shown below when
connecting to models in the F102 series.

NOTE:
• Arrange in such a way that the receiver’s ventilation holes are not obstructed so that the heat can

dissipate.

• Do not place other components directly on top of the receiver.
• To ensure safety, do not make stacks of more than three components.