Panasonic KX-P7305 사용자 설명서
Upgrade Options
Settings and Printing
Network
Maintenance and Spec.
Maintenance and Spec.
4
The following upgrade options can be installed in the printer.
2nd Feeder (KX-PMF3)
An additional cassette can be used by installing this option. Refer to the installation
manual included in the carton box with the option.
manual included in the carton box with the option.
RAM Board: 16 MB (KX-PEM12) or 32 MB (KX-PEM13)
Installed to increase the printer’s memory. To install it, see the following instructions.
CAUTION
• To prevent static electricity damage to the printer or RAM board,
- Do not touch the connector of the printer board.
- Touch the printer’s bare metal frame often to discharge static electricity from your
- Do not touch the connector of the printer board.
- Touch the printer’s bare metal frame often to discharge static electricity from your
body.
- Handle the circuit board only by the edges.
- Do not lay board on a metal surface.
• To prevent damage to the RAM board, avoid exposing the RAM board to direct sunlight, high
- Do not lay board on a metal surface.
• To prevent damage to the RAM board, avoid exposing the RAM board to direct sunlight, high
temperatures or humidity.
1
Turn the printer off, unplug the power cord and disconnect any cables
connected to the connectors on the back of the printer.
connected to the connectors on the back of the printer.
Upgrade Options
Installing the RAM Board