Panasonic KX-PS8100 사용자 설명서
22
Before You Start
To prevent static electricity damage to any of the following components,
touch a grounded metal surface, such as the printer’s bare metal frame prior
to touching the component.
touch a grounded metal surface, such as the printer’s bare metal frame prior
to touching the component.
•
The interface connectors—SCSI, parallel, and optional network
•
ADF interface connector
•
Electrical components, connectors inside the printer, any components on
the optional board (hard disk drive, SDRAM DIMMs, Ethernet network
card, or Token Ring network card)
the optional board (hard disk drive, SDRAM DIMMs, Ethernet network
card, or Token Ring network card)
•
The connector pins on the optional 2nd cassette feeder for the printer
Always use a shielded cable. Use of an unshielded cable can result in radio
interference with data.
interference with data.
Waste material may be dumped or incinerated under conditions which meet
national and local environmental regulations.
national and local environmental regulations.
Static electricity
damage
damage
Interface cable
Waste disposal
method
method