Panasonic KX-PS8100 사용자 설명서

 

After you install the hard disk and power on the printer, you may be 
prompted to initialize the new hard disk drive. If so, follow the directions 
below:

 

From 

 

 or 

 

, press the 

 

 

button to enter the 

 

 menus.

 

Press the 

 

▲

 

button until “

 

” 

appears. Follow the instructions on the printer LCD 
panel.

 

The following section explains how to install a 32 or 64 MB SDRAM 
(Synchronous Dynamic Random Access Memory) DIMM (Dual In-line 
Memory Module) on the KX-PS8100.

To install the SDRAM DIMM (illustrated below) you will need to do the 
following:

 

•

 

Remove the printer controller board from the back of the printer.

 

•

 

Install a 32 or 64 MB SDRAM DIMM in either of the empty SDRAM slot on 
the printer controller board.

 

•

 

Replace the printer controller board.

 

•

 

metal frame prior to touching the component.

 

•

 

SDRAM DIMM

 

•

 

Do not drop or bend the SDRAM DIMM.

 

•

 

Do not touch the connector edge of the SDRAM DIMM.

 

•

 

Protect the SDRAM DIMM from static electricity by keeping it in its anti-
static package until you are ready to install it.

 

•

 

Avoid exposing the SDRAM DIMM to direct sunlight, high temperatures, 
or humidity.

The shape of a 
SDRAM DIMM is 
subject to change.