honda-automobiles quicksilver 54 사용자 설명서
replaced if they become bent or chipped from impacting solid objects or when the cutting surface
becomes dull from extended use.
becomes dull from extended use.
10. Check the blade and spindle retaining nuts and bolts at frequent intervals to make sure the blades
and spindles remain tight.
STARTING – STOPPING
1. To start engine, place throttle in choke position, turn key to start. When engine starts, move
throttle to idle position.
2. To stop engine, move throttle or key to stop position.
WARNING! THE ONLY WAY TO INSURE THAT THE BLADES ARE
STOPPED IS TO SHUT OFF THE ENGINE! DO NOT RELY ON THE
CLUTCH TO DISENGAGE THE BLADES WITH THE ENGINE
RUNNING!!!
STOPPED IS TO SHUT OFF THE ENGINE! DO NOT RELY ON THE
CLUTCH TO DISENGAGE THE BLADES WITH THE ENGINE
RUNNING!!!
OPERATIONAL CHECKS
¾ OIL MUST BE PUT IN THE ENGINE BEFORE STARTING!
¾
Prepare the engine according to the ENGINE OWNER’S MANUAL.
¾
Install the Attaching Hardware according to instructions.
¾
Re-check belt alignment and tension frequently.
¾
Periodically check all nuts and bolts for tightness.
¾
Check blade and spindle nuts and bolts at frequent intervals.
6