Alliance Laundry Systems SWD439C 사용자 설명서
Installation
31
800937
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Dryer Exhaust Requirements
Exhaust System Materials
Exhaust system materials are not supplied with the
unit.
unit.
Exhaust duct must be 4 in. (10.2 cm) in diameter
having no obstructions. Rigid metal duct is
recommended. Non-combustible flexible metal duct is
acceptable. Do not use plastic or thin foil ducting,
because it contributes to poor drying performance and
collects lint, which can lead to a fire hazard.
having no obstructions. Rigid metal duct is
recommended. Non-combustible flexible metal duct is
acceptable. Do not use plastic or thin foil ducting,
because it contributes to poor drying performance and
collects lint, which can lead to a fire hazard.
Never install flexible duct in concealed spaces, such as
a wall or ceiling.
a wall or ceiling.
DO NOT use sheet metal screws on exhaust pipe
joints or other fastening means which extend into the
duct that could catch lint and reduce the efficiency of
the exhaust system. Secure all duct joints with duct
tape.
joints or other fastening means which extend into the
duct that could catch lint and reduce the efficiency of
the exhaust system. Secure all duct joints with duct
tape.
NOTE: Kits described above are optional exhaust
system materials available at extra cost.
system materials available at extra cost.
Figure 42
A clothes dryer produces combustible lint.
To reduce the risk of fire and combustion
gas accumulation the dryer MUST be
exhausted to the outdoors.
To reduce the risk of fire and combustion
gas accumulation the dryer MUST be
exhausted to the outdoors.
W116
This gas appliance contains or produces a
chemical or chemicals which can cause
death or serious illness and which are
known to the State of California to cause
cancer, birth defects, or other reproductive
harm. To reduce the risk from substances in
the fuel or from fuel combustion, make sure
this appliance is installed, operated, and
maintained according to the instructions in
this manual.
chemical or chemicals which can cause
death or serious illness and which are
known to the State of California to cause
cancer, birth defects, or other reproductive
harm. To reduce the risk from substances in
the fuel or from fuel combustion, make sure
this appliance is installed, operated, and
maintained according to the instructions in
this manual.
W115
To reduce the risk of fire and the
accumulation of combustion gases, DO NOT
exhaust dryer air into a window well, gas
vent, chimney or enclosed, unventilated
area, such as an attic, wall, ceiling, crawl
space under a building or concealed space
of a building.
accumulation of combustion gases, DO NOT
exhaust dryer air into a window well, gas
vent, chimney or enclosed, unventilated
area, such as an attic, wall, ceiling, crawl
space under a building or concealed space
of a building.
W045
To reduce the risk of fire, DO NOT use
plastic or thin foil ducting to exhaust the
dryer.
plastic or thin foil ducting to exhaust the
dryer.
W354
WARNING
Description
Kit P/N
May Be
Obtained
Locally
Exhaust Duct
(4" Dia.)
(4" Dia.)
Not Available
Yes
Flexible Metal Duct
(4" Dia.)
(4" Dia.)
521P3
Yes
Weather Hoods, with
hinged dampers (4")
hinged dampers (4")
Not Available
Yes
Directional Exhaust
Kit
Kit
528P3
No
Tape
Not Available
Yes
SWD449N
SWD449N
DO
DON’T