honda-automobiles mm60 사용자 설명서

Before each use, check each mower blade for 
damage 

or abnormal wear. 

. 

1. Start the engine and raise the mower deck fully 

with the Lift Control Lever set to 

"UP

". Turn the 

Lowering Speed Control knob fully clockwise to 
prevent descent. 

Do 

not overtighten the knob. 

2. Stop the engine and remove the ignition key. 

Block deck with wood block to prevent lower- 
ing. 

3. 

Inspect each of the blades for cracks, bending 

or signs of wear. The right and center blades 
can 

be seen under the right side of the mower 

deck. The left blade 

can be seen from under 

the left front edge of the mower deck. Turn the 

blades 180

° to inspect the opposite side. 

NOTE: 

If any of the blades show signs of damage 

or excessive wear, a more thorough inspection is 
necessary. 

A dull blade can be sharpened, but a 

blade that is worn out, bent, cracked or otherwise 
damaged must be replaced.