TANDBERG media2 blade mse 8510 사용자 설명서

12

You need to tell conference participants how to join conferences. You can also tell 
them how to use the Far-End Camera Controls (FECC) to navigate menus in the auto 
attendant and choose conference layouts. There is a document: Getting Started: 
Accessing Conferences available in the documentation area of the web site, which you 
can print out and give to conference participants.

It is a good idea to regularly check for updates to the main Media2 blade software 
image. This section describes how to upgrade the Media2 blade using the web. Note 
that you can also upgrade the Media2 blade using FTP; this can be more reliable if 
you are upgrading the device remotely. Upgrading your device via FTP is described 
in the release notes that are available alongside the software images in the support 
section of the web site.
To check for, and download, updates:
1

Log in to the Media2 blade web interface and go to 

 > 

.

2

Make a note of the software version that is currently installed.

3

Go to the support section of the web site and check if a more recent release is 
available for the Media2 blade. 

4

If a more recent release is available, download it and save it locally.

To upgrade the Media2 blade:
1

Unzip the software release file that you downloaded. 

2

In the Media2 blade web interface, go to 

 > 

. 

3

In  the 

 section, click 

 and locate the unzipped file. 

4

Click 

. The browser begins uploading the file to the 

Media2 blade, and a new browser window opens to indicate the progress of the 
upload. 
When finished, the browser window refreshes and indicates that the software 
upgrade is complete.

5

Go  to 

 > 

 to shut down and restart the Media2 blade. 

Note that shutting down the Media2 blade will disconnect all 
participants.