Philips az3142 사용자 설명서

11

1. Select TUNER source.
™

is displayed briefly and then the radio station

frequency is shown.

2. Press BAND once or more to select your waveband.
3. Press SEARCH

∞ or § and release when the frequency in

the display starts running. 

™ The tuner automatically tunes to a station of sufficient

reception. Display shows 

during automatic tuning.

™ If an FM station is received in stereo, 

is shown.

4. Repeat step 3 if necessary until you find the desired station.
• To tune to a weak station, press SEARCH

∞ or § briefly and

repeatedly until you have found optimal reception.

5. Adjust the power slider to TAPE/

position to switch off the

set.

To improve radio reception
– For FM, pull out the telescopic antenna. Incline and turn the

antenna. Reduce its length if the signal is too strong (very
close to a transmitter).

– For AM, the set is provided with a built-in antenna so the

telescopic antenna is not needed. Direct the antenna by
turning the whole set.

Favorite station selection
For your favorite 3 tuner stations, you can use the easy one-touch
programming and selection 1, 2 or 3 buttons.
1. Tune to your desired station (see Tuning to radio stations).
2. To store your station, press 1, 2 or 3 for 2 seconds or more.
™ Display: shows 

briefly, your favorite preset station

number and the tuner frequency.

Programming radio stations
You can store up to a total of 30 radio stations in the memory.
1. Tune to your desired station (see Tuning to radio stations).
2. Press PROGRAM to activate programming.
– Display: 

flashes.

3. Press PRESET 

4 or 3 once or more to allocate a number from

1 to 30 to this station.

4. Press PROGRAM again to confirm the setting.
– Display: 

disappears, the preset number and the

frequency of the preset station are shown.

5. Repeat the above four steps to store other stations.
– You can overwrite a preset station by storing another

frequency in its place.

Tuning to preset stations
Press 1, 2, 3 or PRESET 

4 or 3 until the desired preset station is

displayed.

AZ 1140 /17  

page

11

XP AZ 1140/17  02-02-2000 11:53  Pagina 11