Philips mc-70-21m 사용자 설명서
23
English
3139 115 20742
Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD,
TUNER or AUX, for example).
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD,
TUNER or AUX, for example).
General Information on
Recording
Recording
● For recording, use only tape of IEC type I
(normal tape) or IEC type II (Cr0
2
).
● The recording level is set automatically, regardless
of the position of the Volume, Incredible
Surround, BASS/TREBLE, and so forth.
Surround, BASS/TREBLE, and so forth.
● The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
nothing will be recorded for six to seven
seconds.
● To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
want to protect.
● If “CHECK TAPE” is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening. Do not cover
the Cr0
adhesive tape over the opening. Do not cover
the Cr0
2
tape detection hole when covering the
tab opening.
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
Preparation for Recording
1
Press
TAPE to select tape mode.
2
Load a recordable tape into the tape deck.
3
Press í or ë to select the recording tape side.
➜ A appears on the display for the reverse
side.
➜ B appears on the display for the forward
side.
➜ A appears on the display for the reverse
side.
➜ B appears on the display for the forward
side.
4
Press
AUTO REV. on the remote control
repeatedly to select a recording mode.
➜ å for recording on one side only.
➜ å for recording on one side only.
➜ ∂
∂
∂
∂
∂ for recording on both sides.
5
Prepare the source to be recorded.
CD 1•2•3 – load the disc(s).
TUNER – tune to the desired radio station.
AUX – connect external equipment.
CD 1•2•3 – load the disc(s).
TUNER – tune to the desired radio station.
AUX – connect external equipment.
When recording is in progress
➜
➜
starts flashing.
● It is not possible to change tape side.
● It is not possible to listen to another source.
● It is not possible to activate the timer function.
One Touch Recording
1
Press
CD 1•2•3, TUNER or AUX to select the
source.
2
Start playback of the selected source.
3
Press
0 REC to start recording.
To stop recording
● Press Çon the system.
Note:
– One Touch Recording is not possible in TAPE
mode, "
– One Touch Recording is not possible in TAPE
mode, "
SELECT SOURCE" will be displayed.
Tape Operation/Recording
pg 001-029/MC50-70/22-Eng
3/7/01, 2:23 PM
23