Hitachi cv80d 사용자 설명서

-2-

Turn cleaner on or off by pushing downward on the power
switch .

The HITACHI vacuum cleaner CV-80DP/DC has an
electronic power control. The suction power and the rotary
brush speed can be regulated to suit the floor covering by
sliding the control knob 

. If a stronger suction is required

for thick carpets and hard floors etc., simply slide the knob

to the right side marked         . Likewise, the suction can

be reduced for fabrics and curtains etc., adjusting the
knob to the left side marked         .     mark is for the
economical middle power position.

1. To store the cord, turn the upper cord storage hook 

to the upward position, and wrap the cord around the 
hooks.

2. To release the power cord, turn the upper cord storage 

hook 

down ward, then pull off the complete cord.

3. To help secure the cord during use, fix it on the upper 

cord storage hook 

.

To change the position of the handle, first press with foot
on the handle release pedal at the rear of the cleaner, and
then lower the handle.

(A) Upright position: When the handle is in this 

position the rotary brush is automatically raised 
away from the floor.

(B) Normal working position: This position allows you 

to raise the front of the nozzle head to clear steps.

(C) Low position: For reaching under low furniture.

NOTE: The handle should always be in upright 

position when cleaning tools are used.

Fig. 3

Fig. 4

Fig. 5

Fig. 6

3

4

5

6

3

4

4

5

5

6