Hitachi VT-F382A 사용자 설명서

Getting Started 

13 

 

 

Separate UHF and VHF 

 

 

antenna wires, both 300 ohm 
flat wire 

300 ohm flat UHF and 75 ohm 

 

 

round VHF 

If you have "rabbit ears" (an antenna on top of your TV), you will need an 
additional adapter and 75 ohm extension to make your leads reach from 
the antenna to the VCR.  This connection will work only if you have a 
strong, clear picture on the TV, indicating a strong signal.  Connect the 
antenna to the adapter, and use the cable extension to go from the 
adapter to the VCR.  Use the supplied 75 ohm cable to connect the VCR 
to the TV. 

 

 

 

      

 

Now continue with the hookup: 

1. Using whichever adapter you have fit your antenna with, attach that 
connector to the IN FROM ANT jack on the back of the VCR. 
2. Using the 75 ohm cable supplied with your VCR, connect either end to 
the OUT TO TV jack on the back of the VCR. 
3. Use a second adapter to attach the other end of the 75 ohm connector 
back into the TV (where you first disconnected the antenna). 

 

 

 

 

  

 

Capabilities: With this hookup, you should now be able to perform all basic 
functions provided by this equipment.