Hitachi VT-F382A 사용자 설명서

Basic Operations (Recording) 

34 

 

 If using a cable box the VCR cannot control, turn on the cable box and 

tune it to the channel you want to record before the time the recording is to 
begin. 

You can look back over any of the recordings you have preset, and if you 
need to, clear out any of the programs. Normal programs will clear 
automatically once recording is complete, but daily and weekly settings 
must be cleared out manually. 

 Press GUIDE, then press 3 for the PROGRAM REVIEW option. This 

brings up the screen settings for the first program. Keep pressing 3 to 
cycle through all the programs you have preset. 

 To remove a program, press CLEAR. The screen will display the next 

program, if there are more, or it will switch back to the main menu. 

When you have set up several timed recordings, it may occur that some of 
their times overlap. For example, this can happen if you are set up to 
record shows on a daily or weekly basis, and a special show comes on 
that you try to record during the same time slot. 

Shows with Same Starting Time 
If the overlapping programs start at the same time, the VCR records in 
order that they were programmed. If the shows are all scheduled to start 
at 7 AM, the VCR starts with the first program at 7 AM, and switches to 
what remains of the second program when the first program is done 
recording, and so on. 

Shows with Different Starting Times 
If the programs start at different times, the VCR records the show 
scheduled to start earliest, records the entire show, then moves on to the 
show with the next earliest starting time. 
To avoid recording only bits and pieces of different overlapping shows, 
review your programming and delete those shows that are not essential.