GE 28111 사용자 설명서

the handset near the base.
From the Handset Setup Menu:
1.  Press the caller ID-volume ( 6 or 5) button to scroll to the 

DEREGISTRATION sub-

menu.

2.  Press the mute/program button to enter the menu. 

4

2NO - - - shows in the display The default setting is "2NO".

3.  Use the touch-tone pad to select 1 for 

YES or 2 for NO. Or use the caller ID-

volume ( 6 or 5) button to scroll to 

1YES or 2NO.

4.  Select 

NO, if you do not want to de-register.

5.  If you select 

1YES, press the mute/program button and MOVE NEAR TO BASE 

displays for 2 seconds, then 

CONFIRM? 1YES 2NO appears in the display.

6.  Press the touch-tone pad to select 1 for 

YES or 2 for NO, or use the caller ID-

volume ( 6 or 5) button to scroll to 

1YES or 2NO.

7.  If you select 

YES, press the mute/program button to confirm. DE-REGISTER... 

shows in the display. You will hear a confirmation tone. Then 

DEREGISTERED shows in the display to confirm the handset is deregistered.

NEEDS REGISTRATION shows in the display. To use the handset,  

If one or more handsets becomes lost, you should de-register all handsets to 

ensure proper system operation. Follow the steps below to de-register all handsets 

at the same time.

1.  Disconnect power from the base by pulling the plug out of the back of the unit.
2.  Press and hold the page button and while holding the page button reconnect 

the power.

3.  Continue to hold the page button until the charge/in use light flashes rapidly.
4.  Release the page button.
5.. Press and release the page button on the base once. All handsets are de-

registered and 

HANDSET NEEDS REGISTRATION shows in the display.

The intercom feature allows you to have a conversation with another 

registered handset without tying up the telephone line, allowing you to still 

receive incoming calls.

1.  Make sure the handset is 

OFF (not in talk mode).

2.  Press the int button on the handset.
3.  Use the touch-tone pad to select the handset you want to page.

4.  Wait for the person at the receiving handset to press the int button.

displays NO ANSWER.

5.  When finished, press the *TONE/exit button or int button on either handset to 

deactivate the intercom.

When you receive an intercom call, your handset beeps. To answer the call press 

the int button or TALK/CALL BACK button.

If you receive a telephone call during an intercom call, the intercom call is 

immediately terminated and both handsets ring. Either handset user may press the 

TALK/CALL BACK button to answer the call.

During a telephone call, you may use the intercom/paging function to page 

another handset and have an off line, private (two-way) intercom conversation. 

You may also have a three-way conversation between the external caller and the 

handsets, or you may transfer the external telephone call to another handset.

1.  During an external call, press the int button, and use the touch-tone pad to enter 

the handset number you want to call.

2.  When finished, press the *TONE/exit button or int button to end the intercom 

call, return to the talk mode, and resume your original telephone conversation.

1.  During an external call, press the int button. 

LINE ON HOLD EXTENSION? shows 

in the display.

2.  Use the touch-tone pad to select Handset #. You will hear a paging tone and 

PAGING shows in the originating handset’s display.

NOTE: PAGING FROM... shows in the display on the receiving 

3.  When the receiving handset connects, press the conf/format button on 

the originating handset to conference with the receiving handset and the 
external caller. 

CONFERENCE shows in the display on the originating and 

receiving handsets.

During an external call, you may transfer the external call to another handset.
1.  Press the int button on the originating handset to put an external call on hold, 

and then page the receiving handset.

2.  Use the touch-tone pad on the handset to select Handset #. You will hear a 

paging tone. 

PAGING shows on the originating handset’s display, and PAGING 

FROM... shows on the receiving handset’s display.

3.  When the receiving handset connects, press the TALK/CALL BACK button on the 

originating handset to transfer the call.

   

-OR-

4.  Press the TALK/CALL BACK button on the originating handset to transfer the 

call. If the receiving handset does not answer within 30 seconds, the originating 
handset rings back and displays 

CALLBACK. If the originating handset does not 

answer within 20 seconds, the call is automatically dropped.

Thomson Digital Technologies Ltd., warrants to the purchaser or gift recipient that if any 

manufacturing defect becomes apparent in this product within 1 year  from the original 

date of purchase, it will be replaced free of charge, including return transportation.
This warranty does not include damage to the product resulting from accidents, misuse 

or leaking batteries.
Should your product not perform properly during the warranty period, either:
1.  Return it to the selling dealer with proof of purchase for replacement,

   

 

OR

2.  Remove the batteries (where applicable), and pack product complete with 

accessories in the original carton (or equivalent).

  — Mail prepaid (with proof of purchase) and insured to:
       

The provisions of this written warranty are in addition to and not a modification of or 

subtraction from the statutory warranties and other rights and remedies contained 

in any applicable legislation, and to the extent that any such provisions purport to 

disclaim, exclude or limit any such statutory warranties and other rights and remedies, 

such provisions shall be deemed to be amended to the extent necessary to comply 

therewith.
If you are unable to find a qualified servicer for out of warranty service, you may write 

to:
   

Thomson Digital Technologies Ltd. 

 

c/o Thomson Inc. 

 

P.O. Box 0944 

 

Indianapolis, Indiana, U.S.A., 46206-0944

Attach your sales receipt to this booklet for future reference. This information is required 

if service is needed during the warranty period.
PURCHASE DATE ______________________________________________________
NAME OF STORE ______________________________________________________