GE 28031 series 사용자 설명서

Storing the Last Number Dialed

Store a dialed number when reviewing it:
1. Make sure the phone is

OFF (not in talk mode).

. Press the REDIAL button on the handset to access the

DIALED menu.

3. Use the 6 or 5 button to scroll to desired record.
4. Press SELECT button and the display shows

STORE?.

5. Press SELECT button again to confirm and the display shows

ENTER

NAME.

6. Repeat Steps 6 through 13 in the section Adding Phone Book Entries,

except instead of entering the number as indicated in Step 8, the dialed

number shows on the display.

NOTE: If the phone book has 50 entries, FULL shows on the

display and you must delete a record before adding a new one.
NOTE: If the dialed number is longer than 20 digits, it cannot

be stored.

Inserting a Pause in the Dialing Sequence

(of a Stored Number)

Press the #PAUSE button on the handset to insert a delay in dialing

sequence of a stored number when a pause is needed to wait for a dial

tone (for example, after you dial 9 for an outside line, or to wait for a

computer access tone.) Each pause counts as one digit in the dialing

sequence.
You can press the #PAUSE button to insert a P (pause) when you enter the

telephone number when adding a phone book entry.

Reviewing Phone Book Records

1. Make sure your phone is

OFF (not in talk mode).

. Press the MENU button and use the 6 or 5 button to scroll to

PHONE

BOOK.

3. Press the SELECT button to enter the phone book.
NOTE: You may press the PHONEBOOK button to shortcut to the phone

book, too.

4. Use the 6 or 5 button to scroll the records

- OR -

Press the number keys to go to the name of the records started with

the corresponding character.

NOTE: Your phone book records are sorted automatically in

alphabetical order.

5. Press the SELECT button to view the details of the record.
6. Use the 6 or 5 button to view the picture ID set, if any.