Hanna Instruments hi 9224 사용자 설명서
17
To print the measured values press the PRINT
key. The printout provides the following informa-
tion:
key. The printout provides the following informa-
tion:
a - Running sample numbers
b - Total accumulative time
c - pH value
d - Temperature in Degrees Centigrade.
b - Total accumulative time
c - pH value
d - Temperature in Degrees Centigrade.
RECORDING MODE (PROGRAMMED PRINTOUTS )
Press the LOG key to enter the recording mode.
The log number and page number will appear
for a few seconds on the display to indicate the
current operational mode. The meter will print
the first measurement taken in that moment,
and will print every 5 minutes thereafter until
the ON/OFF key is pressed.
The printout provides the following information:
The log number and page number will appear
for a few seconds on the display to indicate the
current operational mode. The meter will print
the first measurement taken in that moment,
and will print every 5 minutes thereafter until
the ON/OFF key is pressed.
The printout provides the following information:
a - A running log number.
b - A running sample number in that
b - A running sample number in that
particular log.
c - 5 minute printing interval indicator.
d - The total accumulative time since printing started.
e - pH value.
f - Temperature in Degrees Centigrade.
d - The total accumulative time since printing started.
e - pH value.
f - Temperature in Degrees Centigrade.
When the meter is in recording mode "LOG" is
displayed on the bottom left corner of the LCD
with the pH value on the primary display.
Press the RANGE key to read the tempera-
ture on the primary display.
If no keys are pressed, the meter enters
standby mode to prolong the battery life.
While logging, during the sleep mode, the display will periodically
flash on. This is a normal indication that the meter is in the logging
mode and is currently logging readings.
displayed on the bottom left corner of the LCD
with the pH value on the primary display.
Press the RANGE key to read the tempera-
ture on the primary display.
If no keys are pressed, the meter enters
standby mode to prolong the battery life.
While logging, during the sleep mode, the display will periodically
flash on. This is a normal indication that the meter is in the logging
mode and is currently logging readings.
PRINT
0001 *07.25
4.25
25.0
25.0
a
b
c
c
d
LOG
LOG
INTV
==07== 0005M
0014 *01.05
7.00
25.0
25.0
a
b
b
c
d
e
d
e
f
RECORDING PRINT-OUT
LOG
pH
PRINTING / RECORDING WITH HI
9224
RANGE