Blaupunkt chicago ivdm-7002 installation & connection 사용자 설명서
• DO NOT connect any speaker wires to the metal
body or chassis of the vehicle.
• DO NOT connect the speaker common (-) wires
to each other.
• Connect each speaker wire directly to each
speaker terminal.
• All speaker common (-) wires must remain
floating. ie - no common connections or
connection to vehicle ground.
connection to vehicle ground.
• Connect each pair of speaker leads only to a
single speaker (or speaker system) that has an
impedance of at least 4 ohms, as well as a
50-watt power-handling capability.
impedance of at least 4 ohms, as well as a
50-watt power-handling capability.
• DO NOT connect speaker leads to any inputs on
external amplifiers. This will cause damage to
the internal amplifier of this unit.
the internal amplifier of this unit.
*Caution
AUX 3 Video Input
AUX 3 Audio Input
Center Speaker*
(Black)
(Black/White)
Front Left Speaker*
(White)
(White/Black)
Front Right Speaker*
(Gray)
(Gray/Black)
Rear Left Speaker*
(Green)
(Green/Black)
Rear Right Speaker*
(Purple)
(Purple/Black)
(Yellow)
(Black)
(Brown/White)
(Purple/White)
(Orange)
(Blue)
(Blue/White)
+
–
Center
Rear Right
Front Right
Front Left
Rear Left
Subwoofer
Subwoofer
Monitor 2 Video Output
Monitor 2 Audio Output
Aux 2 Video Input
Aux 2 Audio Intput
Aux 1 Audio Input
Aux 1 Video Input
Monitor 1 Audio Output
Monitor 1 Video Output
Antenna Input
Audio
Preamp
Outputs
Preamp
Outputs
+
–
+
–
+
–
+
–
Fuse
12 V Constant
Ground
Twin CDC Remote (Turn-On)
Max. 100mA
Max. 100mA
Reverse (+)
Navi-Mute (–)
Power Antenna
Max. 100mA
Max. 100mA
System Remote (Turn-On)
Max. 100mA
Max. 100mA
Control Unit
Sirius input or
Blaupunkt Signal
Controller Connection
Blaupunkt Signal
Controller Connection
Sirius Cable Required (7 607 001 606)
1m 13 Pin Male/Male DIN Cable
1m 13 Pin Male/Male DIN Cable
Chicago IVDM-7002 Control Unit
Input & Output Connections
Input & Output Connections