Microboards Technology hcl-6000 사용자 설명서

• Operation 

 

Setup 
10. Disable Drives 

Save Changes? 
 

Drive 1  Port 1 
[*]Enable [ ]Disable 

Drive 1  Port 1 
[ ]Enable [*]Disable 

Setting Saved! 
Please Restart 

System Utilities 
1. Disc Info 

Disc Info 
Please Insert Disc 

Disc Info 
3 Disc Detected, GO? 

 
Use the   Up or 

  Down  button  to select the Disable Drives menu and 

press the   OK button to enter that menu.  
 
 

Use the 

Up or 

 

Down button to select the desired drive/trays you would 

like to enable/disable. Then press   or   button to move the asterisk in front 
of “Enable” or “Disable”  

 
Use the 

Up or 

 

Down button until you see the “Save Changes” screen 

and press the   OK button to save the changes you made.

 

 
 
Once the changes are saved, you will see the “Please Restart” screen.  The 
new settings will not take effect until you restart the system. 
 

 

System Utilities is used to provide information pertaining to the autoloader as well as modification to maintain 
proper functioning. The System Utilities are

:  

¾  Disc Info  
¾  System Info  
¾  Device Info  
¾  Load Default  
¾  Update Firmware  

12.1 Disc Info  
If you are uncertain about the type of blank recordable media you are using, the Disc Info function can help 
you identify the type of disc and provide information about the data encoded on the disc. For blank recordable 
discs, it will tell you the media's format, capacity, manufacture ID, and the Media's certified writing speed.  

Use the   Up or   Down button to select the Disc Info menu and press the 

  OK button to enter that menu. The system will proceed to the Please 

Insert Disc menu.  

 

 
Place your disc(s) into the drives.  
 
After a few seconds, the system will detect the discs and ask you if you want 
to proceed. Wait until all of your discs have been detected and press the   
OK button to continue.  

The information that you see will depend on whether the disc that you inserted has data written on it or if it is 
blank. In this example, three discs have been loaded:  
 
The results are:  

1. CD 21M Data 
  1 Session 1Trk

 

 

A data CD was placed in the top tray 

¾ The “1.” Indicates that the information is for the media 

inserted in tray 1. 

¾ The “CD” indicates that the media inserted is a CD-

ROM. 

¾ The “21M” indicates that 21Mbytes of data is encoded 

on the disc. 

¾ “1Session 1Trk” indicates that the data is all in a single 

session recorded as a single track. 

Press the   Down button to see the next disc.